Catalog Advanced Search

The 48" frame must be purchased in order to use this system.  The cost-effective carrier frame can be fitted with essential lawn care attachments.

The frame consists of two transport and depth control wheels which are adjusted by winding down jacklegs. The wheels are pneumatic wide profile with bearings. The frame has a weight tray and is supplied with three 25 litre water fillable ballast tanks. The towed carrier frame has an adjustable tow bar to accommodate most garden tractors draw bar heights.

Optional Extra: 

• 50mm ball hitch (see related items below)

The 48" frame must be purchased in order to use this system. The cost-effective carrier frame can be fitted with essential lawn care attachments.

The frame consists of two transport and depth control wheels which are adjusted by winding down jacklegs. The wheels are pneumatic wide profile with bearings. The frame has a weight tray and is supplied with three 25 litre water fillable ballast tanks. The towed carrier frame has an adjustable tow bar to accommodate most garden tractors draw bar heights.

Optional Extra: 

• 50mm ball hitch (see related items below)

The Track Ripper is ideal for levelling tracks and filling in potholes, making it especially useful on farm tracks, woodland walks and car parks.

Featuring a working width of 1625mm (64"), the Track Ripper is equipped with a row of removable heavy duty spikes which are used to rip into the ground to break up the surface compaction. If the surface is not broken up prior to filling in potholes, the holes will soon reappear, often larger than before they were repaired.

The ripper bar can then be removed and the levelling lute will level the surface.

The Track Ripper is connected via a three-point linkage. Additional top weight can be added, if required, to help with the penetration depth. The spikes can be easily replaced when worn.

Special features of this tipping trailer are its hard-wearing galvanised finish and wide profile wheels which come complete with bearings to prolong their life.

The wide wheels mean that 'track marks' are kept to a minimum. A manual push/pull handle is fitted to all SCH dump trailers to make them easy to manoeuvre when used away from the tractor. The manual handle is a must for those of us who find reversing difficult or even impossible.

The sprung-loaded pin secures the trailer automatically when returning from the tipped position.

Optional Extras (see related items below):-

• 300mm (12") bolt on heavy duty mesh extension sides
• 50mm ball hitch

This large 45cm (18") diameter roller is shaft-mounted onto the frame with bearings. A scraper blade is fitted to the mounting frame to prevent a build up of earth on the roller face. The roller may be water ballasted for extra weight. There are two filling/emptying points situated at each end of the roller to make the filling and emptying task a simple operation. The 3HGR is mounted on three-point hitch.

The 3HGR has a working width of 106cm (42").

The roller is mounted on ball bearings. An adjustable mud scraper bar is fitted. The 3HGR can be lifted at row-ends and reversed into tight spaces and corners.

Also available in black - please specify when ordering if you require colour change.

This attachment has been designed to rejuvenate and level most types of surfaces. The unit consists of one row of spring tines, which tease through the surface which break up the top surface pan. The following level bars level the surface.

The rear horizontal bars are so designed that the wheel marks from the integral height adjusting wheels are removed. the wheels can be trailed on the surface to reduce drag and allow for light/faster finishing of the surface.

IMPORTANT: Picture for illustration purposes only. This attachment must be used in conjunction with either the SCH 48" Heavy Duty Carrier Frame Towed (Ref: F48T) or Mounted (Ref: F48M) which can be purchased separately (see related items below).

The 48" frame must be purchased in order to use this system. The 48" mounted carrier frame will fit compact tractors fitted with category one three-point linkage fittings; other fittings configurations can be supplied. 

The mounted frame can be lifted at row ends for easier turning.

The frame is designed that a detachable tow bar can be fitted if required, making the frame easily converted for towing. This must be requested at the time of purchase.

The frame consists of two transport and depth control wheels which are adjusted by winding down jacklegs. The wheels are pneumatic wide profile with bearings. The frame has a weight tray and is supplied with three 25 litre water fillable ballast tanks. 

Optional Extra: 

• 50mm ball hitch (see related items below)
• Tow bar adaption kit

The 48" frame must be purchased in order to use this system. The 48" mounted carrier frame will fit compact tractors fitted with category one three-point linkage fittings; other fittings configurations can be supplied. 

The mounted frame can be lifted at row ends for easier turning.

The frame is designed that a detachable tow bar can be fitted if required, making the frame easily converted for towing. This must be requested at the time of purchase.

The frame consists of two transport and depth control wheels which are adjusted by winding down jacklegs. The wheels are pneumatic wide profile with bearings. The frame has a weight tray and is supplied with three 25 litre water fillable ballast tanks. 

Optional Extra: 

• 50mm ball hitch (see related items below)
• Tow bar adaption kit

Used on a regular basis, this small 12" sorrel roller from SCH breaks up any crust that tends to form on the soil.

The small spikes penetrate the surface which allows the air, nutrients and especially water, to start their journey to the roots.

A small roller is attached to iron out any small bumps and to facilitate the transport from the shed to the lawn.

This roller is ideal for use on fine turf surfaces, cricket squares, tennis coarts, bowling greens, etc. 

Spikes can be replaced when worn.

This chain harrow is suitable for work behind tractors of 15hp and above to remove dead vegetation from lawns, paddocks and large grassed areas.

Chain harrows are suitable for seed and bed preparation; both levelling and covering. They are also extremely useful for the rejuvenation of horse arenas.

The standard ring fits over a 50mm ball hitch.  An optional ball hitch can be fitted (see accessories below).

A useful small water tanker for watering trees, shrubs and plants in dry weather. The tanker may also be used for carrying drinking water to animals. Generally the same as the GWC, with the addition of a 12 volt pump discharge.

The hand-held toggle switch turns the water flow on/off.

Optional Extra:

• 50mm ball hitch (see related items below)