Search results for: 'petrol hedge trimmer'

This premium quality, double-sided hedge trimmer is equipped with elongated 75cm blades and powered by an easy-starting 22.2cc air-cooled engine. The high quality laser cut blades guarantee optimal results and a perfect finish even on the thickest and toughest hedges, and have a 22mm tooth spacing.

The unique design of the SmartPull recoil assist ensures easier pulling and up to 30% easier starting. The choke lever automatically returns to the 'run' position with a single pull of the throttle lever, ensuring the engine is perfectly set and ready for the task at hand. When the hedge trimmer is turned off, the ignition switch automatically returns to the start position for easier, faster starting.

The Mitox 750DX Premium+ hedge trimmer features a professional quality four-point anti-vibration system which effectively isolates the handles from engine and transmission vibration. Combined with the ultra-lightweight design and soft-grip handles , you can get a lot of work done with minimal fatigue. The ErgoTwist rear handle is quickly adjusted through 180 degrees offering optimal comfort at any angle.

For optimal performance with low weight and perfect ergonomics, the Mitox 750DX Premium+ petrol hedge trimmer is backed by an industry-leading five year manufacturer's warranty for homeowner use.

This premium quality, double-sided hedge trimmer is equipped with 60cm reciprocating blades and powered by an easy-starting 22.2cc air-cooled engine. The high quality laser cut blades guarantee optimal results and a perfect finish even on the thickest and toughest hedges, and have a 20mm tooth spacing.

The unique design of the SmartPull recoil assist ensures easier pulling and up to 30% easier starting. The choke lever automatically returns to the 'run' position with a single pull of the throttle lever, ensuring the engine is perfectly set and ready for the task at hand. When the hedge trimmer is turned off, the ignition switch automatically returns to the start position for easier, faster starting.

The Mitox 650DX Premium+ hedge trimmer features a professional quality four-point anti-vibration system which effectively isolates the handles from engine and transmission vibration. Combined with the ultra-lightweight design and soft-grip handles , you can get a lot of work done with minimal fatigue. The ErgoTwist rear handle is quickly adjusted through 180 degrees offering optimal comfort at any angle.

For optimal performance with low weight and perfect ergonomics, the Mitox 650DX Premium+ petrol hedge trimmer is backed by an industry-leading five year manufacturer's warranty for homeowner use.

Designed for homeowner use on all types of hedge, the Harry HT22024 is a quality, feature-packed hedge trimmer offered at a very reasonable price.

The 62cm (24") long blade has a large 28mm tooth spacing and blade tip protector. The double-sided reciprocating blade makes it easy to alter the direction of the cut easily for precise cutting every time. The rotating rear handle also makes it easier to cut at a variety of angles with maximum comfort and control.

The 22cc two-stroke engine is more than enough power for effortlessly trimming, producing consistently strong power delivery together with state of the art engine technology, whilst achieving reduced fuel consumption and industry-leading low emission levels.

Weighing just 4.6kg, the anti-vibration system, ergonomically-positioned controls, Walbro carburettor and magnesium alloy casting combine to reinforce the quality of this petrol hedge cutter.

Many of us have a hedge to add privacy and security to our property, so a hedge trimmer is an essential piece of equipment to keep your boundary under control. An ideal candidate to take on the job would be the Webb HC600 petrol hedge trimmer which is powerful, lightweight and easy-handling.

The HC600 is powered by a 26cc two-stroke engine with a full crankshaft for high performance trimming over long periods of use. 

The lengthy 60cm reciprocating blades are double-sided for two-directional cutting and have a maximum branch cutting capacity of 35mm.

The rear handle rotates through five stages over 90 degrees left and right making it is possible to operate the machine on randomly shaped hedges at the most natural and safe working position.

Webb backs this value for money hedge cutter with a two year warranty for domestic use.

Designed for use on all types of hedge, the Cobra HT62C is a quality, feature-packed hedge trimmer offered at a very reasonable price.

The 62cm long blade has a large 28mm tooth spacing and blade tip protector. The double-sided reciprocating blade makes it easy to alter the direction of the cut easily for precise cutting every time. The twist grip rear handle also makes it easier to cut at a variety of angles with maximum comfort and control.

The HT62C is expertly powered by Cobra's own easy-starting 22cc two-stroke engine which provides all the power you need, producing consistently strong power delivery together with state of the art engine technology, whilst achieving reduced fuel consumption and industry-leading low emission levels.

The anti-vibration system, ergonomically-positioned controls, Walbro carburettor and magnesium alloy casting combine to reinforce the quality of this petrol hedge cutter, backed by a 2 year manufacturer's warranty for domestic use.

The Oleo-Mac HCS 247 P is a professional petrol hedge trimmer with adjustable, high quality steel blades for optimum cutting results evenon the thickest, toughest hedges.

This hedge trimmer features a single-sided 75cm (29.5") steel blade.

Powered by Emak's own reliable 1.0hp 21.7cc two-stroke engine, the Oleo-Mac HCS 247 P is fitted with Primer and Lift Starter systems to facilitate cold starting.  The digital coil with electronic rmp limiter maintains mechanical output at any engine speed.  Ignition advance aids easy-starting and favours low fuel consumption.  The professional-grade aluminium gear case, drive linkage with pinion carried in bearings and rods with rollers, combine to guarantee long life, low noise and minimal vibration.  Thanks to the professional grade two-ring piston, top performance over time is enhanced.

Lightweight at 5.2kg, the Oleo-Mac HCS 247 P petrol hedge trimmer has a well balanced design and will give the perfect visual finish to any hedge whilst maintaining plant health.

The Efco Oleo-Mac HC 247 P is a professional anti-vibe petrol hedge trimmer with adjustable, high quality steel blades for optimum cutting results even on the thickest, toughest hedges.

This hedge trimmer features a double-sided 75cm (30") blade with a 180º swivel handle, which is lockable in five intermediate positions, to maximise convenience in any operating position, even close to walls.

Powered by Emak's own reliable 21.7cc 1.0hp two-stroke engine, the Oleo-Mac HC 247 P P is fitted with primer and lift starter systems to facilitate cold starting.  The digital coil with electronic rmp limiter maintains mechanical output at any engine speed.  Ignition advance aids easy-starting and favours low fuel consumption.  The professional-grade aluminium gear case, drive linkage with pinion carried in bearings and rods with rollers, combine to guarantee long life, low noise and minimal vibration.  The anti-vibration system with four springs ensures total isolation of the handles.  Thanks to the professional grade two-ring piston, top performance over time is enhanced.

Lightweight at 5.4kg, the Efco Oleo-Mac HC 247 P petrol hedge trimmer has a well balanced design and will give the perfect visual finish to any hedge, no matter how tough or dense, whilst maintaining plant health.

The Oleo-Mac HC 246 P is a professional anti-vibe petrol hedge trimmer with adjustable, high quality steel blades for optimum cutting results even on the thickest, toughest hedges.

This hedge trimmer features a double-sided 60cm (23.6") blade with a 180º swivel handle, which is lockable in five intermediate positions, to maximise convenience in any operating position, even close to walls.

Powered by Emak's own reliable 21.7cc 1.0hp two-stroke engine, the Oleo-Mac HC 246 P is fitted with primer and lift starter systems to facilitate cold starting.  The digital coil with electronic rmp limiter maintains mechanical output at any engine speed.  Ignition advance aids easy-starting and favours low fuel consumption.  The professional-grade aluminium gear case, drive linkage with pinion carried in bearings and rods with rollers, combine to guarantee long life, low noise and minimal vibration.  The anti-vibration system with four springs ensures total isolation of the handles.  Thanks to the professional grade two-ring piston, top performance over time is enhanced.

Lightweight at 5.2kg, the Oleo-Mac HC 246 P petrol hedge trimmer has a well balanced design and will give the perfect visual finish to any hedge, no matter how tough or dense, whilst maintaining plant health.

The Hyundai HYPT5200X is a 52cc long reach petrol pole hedge trimmer designed to provide impressive cutting power on hedges that are tall and hard to reach. It provides a considerable reach of two to three metres when fully extended, which can be increased to an arm's reach of four metres when used in conjunction with the one metre extension shaft included.

Featuring a lightweight aluminium shaft, loop handle, the low vibration makes the HYPT5200X a comfortable pole hedge trimmer to use, even for extended periods and the triple split shaft enables easy transportation and storage, capable of being separated in seconds.

The 40cm double-sided reciprocating blade will slice through all types of hedging up to 20mm in diameter with ease. The 14 position / 270 degree pivot head allows trimming at multiple angles to tackle every aspect of your hedges.

The combined length of the tool, when held 1 metre off the ground, is 4 metres allowing you to easily reach the top of tall hedges without having to resort to using a ladder keeping your hedges well presented all over.

Powered by a two-stroke 52cc Hyundai Euro V low emission engine, the HYPS5200X provides impressive cutting power to the 425mm long cutting blade and can tackle the most demanding of hard to reach hedges.

The HYPT5200X features an ergonomic loop handle and anti-vibration system to support a comfortable working position to cut and shape the top and sides of tall hedges.

The padded front handle enables multiple grip positions working at different angles and heights whilst also reducing vibration for increased comfort. A double support harness is also included.

In The Box:

• HYPT5200X hedge trimmer
• Extension bar
• Tool kit
• Double support harness
• 2-stroke mixing bottle
• User manual

If you've got long and tall hedges, then this pole petrol hedge trimmer from Cobra Garden will be right up your garden path! It is designed for domestic use.

The LRH26C is powered by Cobra's own 26cc two-stroke engine which provides all the power you need, producing consistently strong power delivery together with state of the art engine technology, whilst achieving reduced fuel consumption and industry-leading low emission levels.

With an overall machine length of 251cm, the engine on the Cobra LRH26C serves as a counterweight to the cutter bar enabling you to safely trim and maintain high hedges with your feet firmly on the ground. The solid straight shaft is equipped witha d-loop handle and a 62cm double-sided reciprocating cutting blade which is ideal for shaping your hedge. Thanks to the wide 30mm tooth spacing, you can tackle even thumb-sized branches with ease. Greater versatility to cut the top of your hedges is provided by the 135 degree articulating cutting head. The protective guard helps shield the operator from getting too close to the working end of the machine, whilst the ergonomically-positioned controls and single shoulder harness make safe operation even comfortable.

The Cobra LRH26C long reach petrol hedge cutter is lightweight to use and offers fantastic value for money for homeowner use. For heavier, more regular use, you should consider the Kawasaki-powered LRH26K.

With Webb's petrol pole hedge trimmer you can maintain those high, hard to reach hedges with your feet planted firmly on the ground.

The UK-designed PHT26 employs a high capacity 26cc air-cooled, two-stroke engine with a full crankshaft to enable the machine to withstand continuous high-rev operation and maximise torque output for fast and efficient trimming.

Designed with comfort and manoeuvrability to the fore, the Webb PHT26 weighs 6.5kg and combines an an optimised centre of gravity with an effective anti-vibration system and a fatigue-limiting shoulder harness.

At the sharp end is a pair of 42cm double-sided blades with a maximum branch capacity of 25mm. The cutting head is adjustable so you can angle it to deal with the tops of hedges.

The aluminium shaft is fitted with a loop and bar handlebar for firm, positive grip. The shaft also splits to save storage space in the shed.

For greater reach and to avoid the use of a ladder, add the 80cm extension shaft.

Benefitting from several new features, the Mitox 600DX Premium is a powerful, lightweight, double-sided hedge trimmer ideal for demanding home and semi-professional use.

The 610mm hardened dual reciprocating blades offer maximum cutting results every time.  The effective vibration dampening system and reduced fuel consumption make the Mitox 600DX Premium hedge cutter economical and comfortable for prolonged periods of use. The 25.4cc engine is easy starting thanks to the new SmartPull recoil assist which reduces resistance in the starter rope, whilst the auto-return choke switch ensures ease of control and operation.

A key feature of the Mitox 600DX Premium hedge trimmer is the adjustable rear handle which twists through 180º to enable an ergonomic grip at any working angle.  The combination of its low weight and well balanced centre of gravity minimise operator fatigue and ensure optimal comfort whilst shaping and trimming large areas of hedge.