Petrol Chipper Shredders

The GTS1300C Compo is a multi-functional shredder from GTM Professional with two different output options that are easy to change.

The 160cm high output is suitable for processing branches with a diameter of up to 10cm (dry wood up to 8cm). Determine the desired discharge height with the adjustable deflector and collect the wood chips in a wheelbarrow or trailer, or spray them directly into the garden. The 35cm low output is suitable for material with a high moisture content, such as grasses, hedge clippings or plant debris. The finely ground material ensures an accelerated composting process.

This compo wood chipper is equipped with a powerful electric start 420cc Loncin G420F motor and an efficient rotor shredding system. This system consists of a rotor with two PRO blades that rotate along the counter blade at high speed. GTM's high-alloy PRO blades have an extra long life and have two cutting edges so they can be turned over for reuse.

Thanks to the wide 50cm x 35cm input, it is rarely necessary to pre-remove side branches. This guarantees a high working speed. The GTS1300C Compo is lightweight and easy to move. The compact dimensions and the lashing eyes under the infeed make it possible to transport the machine safely.

A robust chassis and the well-thought-out proportions of the machine make the GTS1300C Compo perfectly balanced. The GTM Professional GTS1300C Compo is equipped with an emergency stop bracket and meets the latest European standards for safe use.

Optionally available:

• Rotatable output for more variations in output directions
• Drawbar to connect the machine to a car or quad
• Push tool for pressing soft material into the feed
• Grid for the low output for an extra fine result

** SPECIAL ORDER ITEM ** 

The wheel-driven GTS1300WD is a self-propelled wood chipper designed for the professional user in the field of tree care and garden maintenance.

Thanks to the battery-powered system (2 x 12V), the machine is easy to move, even over difficult and hilly terrain.  The machine has two forward speeds of 3km/h and 6km/h and two speeds in reverse of 1.5km/h and 3km/h.

Charged with a full battery and equipped with a 420cc Loncin engine, the GTM Professional GTS1300WD will cover a distance of approximately 9.5km on flat pavement or 3km on hilly or muddy ground. The drive system is suitable for slopes up to 15 degrees so you can easily load the machine into a trailer.

Thanks to the two sturdy pneumatic tyres at the rear and two wivel wheels at the front, the GTS1300WD is extremely manoeuvrable. 

Steering is smooth with the handlebar mounted below the input chute. The desired speed can also be determined on the handlebar where you also have a good view of the remaining battery capacity.

This wood chipper has a strong Loncin G420F motor with 15hp power and is suitable for chipping branches up to a diameter of 10cm (dry wood 8cm). The efficient rotor shredding system automatically pulls in the branches and guarantees a high working speed. The PRO blades made of high-alloy steel have an extra long life and are equipped with two cutting edges. When both sides are worn, the blades can possibly be sharpened (always have this done by a specialist).

Just like the standard GTS1300 model, this machine is equipped with various safety features. For example, the GTS1300WD has safety switches on the input and output that block the operation of the machine during (maintenance) work and a safety bar is mounted around the input that immediately stops the machine in emergency situations. In addition, the GTS1300WD meets the strict forestry standard (NEN-EN 13525: 2005 + A2: 2009) to guarantee safe use.

The GTS1300WD comes standard with a 270° rotatable output and hour meter.

A self-propelled wood chipper, the GTS1300RG is equipped with caterpillar tracks to operate on rough and difficult to access terrain. This makes the machine not only suitable for gardens and parks, but also for forestry. The new construction can easily handle steep slopes of up to 20°.

The GTS1300RG is a powerful wood chipper with compact dimensions. The machine fits in a van, on any trailer and easily goes through a standard garden gate.

The 18cm wide track system is powered by a 5.5hp Loncin engine and has three forward gears plus reverse which produces a maximum speed of 4.5km/h.

A recoil start 420cc Loncin engine powers the chipper itself, which features a 111cm high input chute with a 50cm x 28cm opening.

The shredding system consists of a metal drum (rotor) on which two knives are mounted. This works quickly, efficiently and has a high capacity. The system draws in fresh wood with a diameter of up to 10cm (dry wood up to 8cm), after which it is effortlessly shredded into fine wood chips.

The wood chips are thrown high and go straight into a trailer or wheelbarrow via the swivel outlet chute with continuously adjustable deflector up to 85°. The wood chipper comes standard with PRO blades, which last twice as long as regular blades.

The GTM Professional GTS1300RG is certified by TÜV Rheinland and meets the highest safety requirements.

You can easily convert this GTM Professional wood chipper on tracks into a dumper. For this a transformation unit (MZSGTSU02DUMP001) is available. This unit consists of the tipping container and a hydro kit. For converting the wood chipper into a dumper or vice versa, only a hoist and a key 17 are required.

A self-propelled wood chipper, the GTS1300RGE is equipped with caterpillar tracks to operate on rough and difficult to access terrain. This makes the machine not only suitable for gardens and parks, but also for forestry. The new construction can easily handle steep slopes of up to 20°.

The GTS1300RGE is a powerful wood chipper with compact dimensions. The machine fits in a van, on any trailer and easily goes through a standard garden gate.

The 18cm wide track system is powered by a 5.5hp Loncin engine and has three forward gears plus reverse which produces a maximum speed of 4.5km/h.

A electric start 420cc Loncin engine powers the chipper itself, which features a 111cm high input chute with a 50cm x 28cm opening.

The shredding system consists of a metal drum (rotor) on which two knives are mounted. This works quickly, efficiently and has a high capacity. The system draws in fresh wood with a diameter of up to 10cm (dry wood up to 8cm), after which it is effortlessly shredded into fine wood chips.

The wood chips are thrown high and go straight into a trailer or wheelbarrow via the swivel outlet chute with continuously adjustable deflector up to 85°. The wood chipper comes standard with PRO blades, which last twice as long as regular blades.

The GTM Professional GTS1300RGE is certified by TÜV Rheinland and meets the highest safety requirements.

You can easily convert this GTM Professional wood chipper on tracks into a dumper. For this a transformation unit (MZSGTSU02DUMP001) is available. This unit consists of the tipping container and a hydro kit. For converting the wood chipper into a dumper or vice versa, only a hoist and a key 17 are required.

NB: Images for illustration purposes only - shows recoil start model.

** SPECIAL ORDER ITEM ** 

A world-class chipper designed for commercial use and built in New Zealand by Hansa, the C21PTO is the largest gravity self-feeding model in the range. Boasting an extremely heavy duty cutting disc, the machine is able to handle the rigorous needs of the most demanding operator. Its inlet chute is specifically shaped to assist the feeding of heavier branches and bushy foliage.

Suitable for lawn tractors of 20hp to 55hp, this chipper is connected to the tractor by the three-point linkage. Designed for a PTO speed of 540rpm, the driveshaft is fitted with a shear pin device for protection of the machine and tractor. Because of its compact design, the machine is relatively light, easily manoeuvred and can be operated in areas with restricted space and access.

This disc type chipper is of solid construction which boasts a chipping capacity of 100 to 130mm diameter branches, depending on the type of wood. The C21PTO will process branch and brushy material and other vegetation material. It has a large inlet chute for feeding in bigger bundles of brushy and twiggy materials, vines and larger branches, therefore no pre-cutting is necessary. The machine has a very efficient self feeding action thanks to the design of the rotor and the blade set-up, resulting in a user friendly machine easy on the operator. The inertia generated by the large rotor disc creates enough momentum to keep cutting as well as giving the machine enough draught to discharge the mulch up to 10 metres away (or close to the operating area by adjusting the deflector on the outlet chute). Having a discharge height of 1.8 metres makes the C21PTO ideal for discharging onto a trailer or truck, eliminating the need for any double handling of mulch.

By pivoting open the outlet chute this allows full access to the inside of the machine. This makes changing blades for sharpening simple and requires little effort. As with all of the larger Hansa chippers, adjustable blades eliminate the need to adjust the anvil after sharpening, giving the ability to adjust each blade individually to the anvil for optimal clearance. The blades will last anywhere up to 30 hours use before requiring sharpening, depending on the type of material being mulched.

The Hansa C21PTO is suitable for us by contractors, farmers and local authorities, in orchards, parks and nature reserves.

The Hansa C16C is a semi-commercial petrol wood chipper ideal for dealing with large scale organic waste. The machine's compact design means it can be easily manoeuvred and operated in areas with restricted access, and it is narrow enough to fit through a standard gateway.

This disc-type chipper is of solid construction with a chipping capacity of 110mm diameter branches, depending on the type of wood. The C16C features a large inlet chute to accommodate big bundles of prunings. It has a very efficient self-feeding action thanks to the design of the rotor and blade set-up. The inertia generated by the large rotor disc creates the momentum to efficiently cut and discharge the mulch up to 8 metres away (or close to the operating area by adjusting the deflector on the outlet chute). The 1.5 metre discharge height of the C16C makes this model ideal for discharging onto a trailer or truck, eliminating the need for any double handling of mulch.

Pivoting open the outlet chute allows full access to the inside of the machine for sharpening and changing the blades. As with all of the larger Hansa chippers, adjustable blades eliminate the need to adjust the anvil after sharpening, giving the ability to adjust each blade individually to the anvil for optimal clearance. The blades will last anywhere up to 30 hours use before requiring sharpening, depending on the type of material being mulched.

The Hansa C16C is powered by a 16hp V-twin Briggs & Stratton Vanguard engine with recoil start.

The wheel-driven GTS1800WD is a self-propelled wood chipper for the professional user in the field of tree care and garden maintenance.

Thanks to the battery-powered system (2 x 12V), this machine is easy to move. A full battery can cover a distance of approximagely 6km on level pavement or 2km on hilly or muddy terrain. The system has two forward speeds (3km/h and 6km/h) and two reverse speeds (1.5km/h and 3km/h).

The drive system is suitable for slopes of up to 15°, so you can easily load the machine into a bus or trailer. With two sturdy pneumatic tyres at the rear and two swivel wheels at the front, the GTS1800WD is very manoeuvrable. Steering is smooth with the handlebar bracket mounted below the entry. The desired speed can also be determined on the handlebar bracket and you have a good view of the remaining battery capacity.

This wood chipper has a strong Loncin LC2V80FD gwin cylinder engine of 24hp and is suitable for shredding branches up to a diameter of 12cm (dry wood 1cm). The efficient rotor shredding system automatically pulls in the branches and guarantees a high working speed. The PRO blades made of high-alloy steel have an extra long life and are equipped with two cutting edges. When both sides are worn, the blades can be sharpened (always have this done by a specialist).

The safety of the user is always our top priority. For example, the GTS1800WD has safety switches on the input and output that block the operation of the machine during (maintenance) work, and a safety bracket has been mounted around the input that immediately stops the machine in emergency situations. In addition, the GTS1800WD meets the strict forestry standard (NEN-EN 13525:2020) to guarantee safe use.

The GTM Professional GTS1800WD comes standard with a 270° rotating output and hour meter.

** SPECIAL ORDER ITEM ** 

The wheel-driven GTS1800WD is a self-propelled wood chipper for the professional user in the field of tree care and garden maintenance.

Thanks to the battery-powered system (2 x 12V), this machine is easy to move. A full battery can cover a distance of approximagely 6km on level pavement or 2km on hilly or muddy terrain. The system has two forward speeds (3km/h and 6km/h) and two reverse speeds (1.5km/h and 3km/h).

The drive system is suitable for slopes of up to 15°, so you can easily load the machine into a bus or trailer. With two sturdy pneumatic tyres at the rear and two swivel wheels at the front, the GTS1800WD is very manoeuvrable. Steering is smooth with the handlebar bracket mounted below the entry. The desired speed can also be determined on the handlebar bracket and you have a good view of the remaining battery capacity.

This wood chipper has a strong 21hp Honda GX630 engine and is suitable for shredding branches up to a diameter of 12cm (dry wood 1cm). The efficient rotor shredding system automatically pulls in the branches and guarantees a high working speed. The PRO blades made of high-alloy steel have an extra long life and are equipped with two cutting edges. When both sides are worn, the blades can be sharpened (always have this done by a specialist).

The safety of the user is always our top priority. For example, the GTS1800WD has safety switches on the input and output that block the operation of the machine during (maintenance) work, and a safety bracket has been mounted around the input that immediately stops the machine in emergency situations. In addition, the GTS1800WD meets the strict forestry standard (NEN-EN 13525:2020) to guarantee safe use.

The GTM Professional GTS1800WD comes standard with a 270° rotating output and hour meter.

** SPECIAL ORDER ITEM ** 

The 1800R is equipped with caterpillar tracks to operate on rough and hard to access terrain. Therefore, this machine is not only suitable for garden and park, but also for forestry. The low and rigid construction can easily handle steep hills of up to 20°.

This self-propelled wood chipper features an efficient rotor chipping system, powered by a 21hp Honda GX630 V-twin engine. Branches up to 12cm (dry wood 10cm) are automatically pulled inside and effortlessly processed into fine wood chips.

The tracks are driven by a Honda GX160 engine. It has are three speeds forward and one reverse speed. With a width of only 72cm, the machine fits through narrow passages with ease. Also loading and unloading the machine in a van or onto trailer is no longer an effort with this driving system.

To meet all the needs of professionals, the 1800R is standard equipped with an hour counter set and a 270° turnable output. Besides, the deflector on the output is adjustable up to 100° so that the chips can be ejected in any direction.

The 1800R has been certified independently and it meets the highest safety requirements, including the forestry machine standard (NEN-EN 13525:2020). The machine is provided with a panic bar around the input and safety switches on both the input and the output.

You can easily convert this GTM Professional wood chipper on tracks into a dumper. For this a transformation unit (MZSGTSU02DUMP001) is available. This unit consists of the tipping container and a hydro kit. For converting the wood chipper into a dumper or vice versa, only a hoist and a key 17 are required.

** SPECIAL ORDER ITEM ** 

A very robust and versatile chipper designed to handle a wide range of wood types and sizes, you can take control of wood chipping tasks with RTC-160 from Rock Machinery. Engineered for efficiency, durability and convenience, this road-towable chipper is the ultimate solution for property owners, landscapers, and forestry professionals alike.

Equipped with a V-Twin 32hp Kohler petrol engine and heavy-duty 72.9kg impeller flywheel with two reversible steel blades, the Rock Machinery RTC-160 effortlessly transforms branches, brush, and other wood debris into valuable wood chips. With a generous 150mm (6") capacity, it tackles even sizable branches with ease, reducing them to uniform chips in seconds.

Featuring a self-feeding roller and stress load sensor, the RTC-160 chipper makes quick work of wood processing tasks. Its efficient design minimises downtime and maximises productivity, allowing you to complete projects faster and more efficiently than ever before.

Designed for maximum versatility, the RTC-160 chipper features a road-towable design which enables easy transport between job sites. Whether you're clearing a residential property or tackling a commercial landscaping project, this chipper goes wherever you need it, thanks to its convenient tow hitch and rear lights.

Simplify upkeep and prolong the life of your equipment with the RTC-160 chipper's easy maintenance features. Accessible components and straightforward maintenance procedures make routine upkeep a breeze, minimising downtime and ensuring optimal performance.

Whether you're clearing tree branches or clearing wood for landscaping projects, the Rock Machinery RTC-160 chipper is up to the task. Its versatile design and powerful performance make it an essential tool for a wide range of applications, from residential landscaping to commercial forestry.

Experience the difference that the Rock Machinery RTC-160 chipper can make in your wood chipping endeavours. With its powerful performance, durable construction and convenient towable design, this is the ultimate solution for tackling wood processing tasks with ease and efficiency.

NB: YOU WILL NEED A FORKLIFT / TELEHANDLER TO UNLOAD FROM DELIVERY VEHICLE. PLEASE GET IN TOUCH PRIOR TO PURCHASING FOR ANY DELIVERY QUERIES.