Petrol Chipper Shredders

Since its introduction back in 2014, the CVR-85 has become Rock Machinery's most popular wood chipper, being favoured across the industry by landscapers, tree surgeons and domestic customers alike.

The Rock CVR-85 features an easy-to-manoeuvre, compact design with a capacity to deal with a wide range of branches and vegetation with a diameter of up to 8.5cm.

The CVR-85 chipper is powered by an electric start 13hp Briggs & Stratton engine with a commercial-style twin belt drive system, and is equipped with heavy-duty hardened steel reversible blades pre-set with a 0.5mm clearance to cope with smaller branches.

Recent updates Rock has made to the chipper based on previous customer feedback include the "lock in" adjustable exit chute so now you can choose where you want the chips exiting, a safety cut-off switch that immediately cuts power to the engine once the hopper is opened and a more conveniently-located emergency stop button.

Designed for semi professional and domestic applications, the GTM Professional GTS900 is a powerful garden chipper with a capacity to chip branches up to 80mm in diameter. The chipping mechanism is a drum on which two blades are mounted. Branches are easily drawn in and chipped, and safety is ensured thanks to the emergency stop feature.

The GTM Professional GTS900 is powered by a high performance 9hp Loncin engine and the large 400mm wheels and handle enable easy transportation.

If you maintain a substantial garden, the Hansa C7 petrol chipper is the ultimate weapon capable of tackling most garden debris including branches, general prunings, hedge cuttings, vines, flower stalks and even fibrous material.

Starting the C7 is easy thanks to the soft start engagement system. The 6.5 horsepower of the quality Honda GCX200 196cc four-stroke engine is transmitted to the cutting disk through a twin belt drive, which provides smooth running and protects the engine against shock loads.

Operating with two cutting knives, the heavy duty C7 has the appetite to chip branch material (green or dry) up to 70mm in diameter. 

With the Hansa C7 no pre-cutting is necessary and the branches are drawn into the input chute. The cutting blades shear the material against an adjustable hardened counterknife, or anvil. This action will be just as efficient in 10 years' time as on the first day of use, so long as the knives are kept sharp.

The extremely efficient self-feeding action can be attributed to the design of the rotor and the blade set up. The inertia generated by the large rotor disk creates enough momentum to continue cutting, as well as providing plenty of draught to discharge the mulch up to 4 metres away. The distance can be moved closer to the operating area, if desired, by adjusting the deflector on the chute. Having a discharge height of 0.7 metres makes the C7 model ideal for discharging onto a trailer or wheelbarrow, thus eliminating the need for any double handling of the material.

The simple design of the C7 allows full access to the inside of the machine by pivoting open the outlet chute, so that changing the blades for sharpening is simple and requires little effort. The blades can last anywhere up to 30 hours before requiring sharpening, depending on the type of material being handled. The cantilver rotor design allows stringy materials to be processed without running the risk of wrapping around the shaft.

Built to last, the housing, inlet and outlet chutes of Hansa chippers and shredders are made of solid steel, with no plastic components. The C7 is fitted with large pneuamtic wheels and integral handles for easy transportation, and rugged feet to keep the machine static during operation.

The GTS900C Compo from GTM Professional is a multi-functional chipper with two different output options that are easy to change.

The high 118cm output is suitable for processing branches with a diameter of up to 8cm (dry wood up to 6cm). Determine the desired discharge height with the adjustable deflector and collect the wood chips in a wheelbarrow or trailer, or spray them directly into the garden. The 35cm low output is suitable for material with a high moisture content, such as grasses, hedge clippings or plant debris. The finely ground material ensures an accelerated composting process.

This Compo wood chipper is equipped with a powerful 302cc Loncin G300FA motor and an efficient rotor shredding system. This system consists of a rotor with two PRO blades that rotate along the counter blade at high speed. GTM's high-alloy PRO blades have an extra long life and have two cutting edges so they can be turned over for reuse.

Thanks to the wide input of 40 x 28cm, it is rarely necessary to pre-remove side branches. This guarantees a high working speed. The GTS900C is lightweight and easy to move with its double push handles. The compact dimensions and the lashing eyes under the infeed make it possible to transport the machine safely.

A robust chassis and the well-thought-out proportions of the machine make the GTS900C perfectly balanced. The GTS900C is equipped with an emergency stop and meets the latest European standards for safe use.

Optionally available:

• Drawbar to connect the machine to a car or quad
• Push tool for pressing soft material into the feed
• Grid for the low output for an extra fine result

The Hansa C13 PTO (power take off) wood chipper is suitable for large estates, local authories, golf courses, contractors, farmers and orchadists in their quest to recycle valuable organic waste. Suitable coupled to any small tractor from 17hp to 45hp, simply hitch the chipper to your three-point linkage and run 540rpm to give you a machine that has the same capabilities as its engine-powered equivalent. 

The Hansa C13 will mulch your organic matter to produce the finest fertiliser in the form of compost in a matter of weeks, or for use as mulch to surpress weed growth and retain moisture in the soil.

Employing two cutting knives, the heavy duty C13 has the appetite to chip branch material (green or dry) up to 90mm thick. 

With the Hansa C13 no pre-cutting is necessary and the branches are drawn into the input chute. The cutting blades shear the material against an adjustable hardened counterknife, or anvil. This action will be just as efficient in 10 years' time as on the first day of use, so long as the knives are kept sharp.

The extremely efficient self-feeding action can be attributed to the design of the rotor and the blade set up. The inertia generated by the large rotor disk creates sufficient momentum to continue cutting, as well as providing enough of draught to discharge the mulch up to 4 metres away. The distance can be moved closer to the operating area, if desired, by adjusting the deflector on the chute. Having a discharge height of 1.2 metres makes the C13 model ideal for discharging onto a trailer, wheelbarrow or stockpile, eliminating the need for any double handling of the material.

Access to blades and clearing of the cutting chamber is simple - a few turns of the wingnut and everything is accessible within seconds. The blades are individually adjustable, eliminating the need for angle adjustment and allowing optimal clearance. The blades can last anywhere up to 30 hours before requiring sharpening, depending on the type of material being handled. 

The C13 housing is constructed from 5mm steel plate with a quality powder-coated finish (media-blasted surface for excellent adhesion), which provides the strength and resilience that means this machine will last you a lifetime. 

Landscape gardeners and maintainers of serious acreages will be impressed by the Hansa C13's ability to successfully recycle organic waste.

This is the ideal machine for small- to medium-sized horticultural businesses, orchards, nurseries, farms, school grounds and parks where organic waste is too precious to burn or dump. The Hansa C13 will mulch your organic matter to produce the finest fertiliser in the form of compost in a matter of weeks, or for use as mulch to surpress weed growth and retain moisture in the soil.

Starting the C13 is easy thanks to the soft start engagement system. The 6.5 horsepower of the quality Honda GCX200 196cc four-stroke engine is transmitted to the cutting disk through a twin belt drive, which provides smooth running and protects the engine against shock loads.

Employing two cutting knives, the heavy duty C13 has the appetite to chip branch material (green or dry) up to 90mm thick. 

With the Hansa C13 no pre-cutting is necessary and the branches are drawn into the input chute. The cutting blades shear the material against an adjustable hardened counterknife, or anvil. This action will be just as efficient in 10 years' time as on the first day of use, so long as the knives are kept sharp.

The extremely efficient self-feeding action can be attributed to the design of the rotor and the blade set up. The inertia generated by the large rotor disk creates sufficient momentum to continue cutting, as well as providing enough of draught to discharge the mulch up to 4 metres away. The distance can be moved closer to the operating area, if desired, by adjusting the deflector on the chute. Having a discharge height of 1.2 metres makes the C13 model ideal for discharging onto a trailer, wheelbarrow or stockpile, eliminating the need for any double handling of the material.

Access to blades and clearing of the cutting chamber is simple - a few turns of the wingnut and everything is accessible within seconds. The blades are individually adjustable, eliminating the need for angle adjustment and allowing optimal clearance. The blades can last anywhere up to 30 hours before requiring sharpening, depending on the type of material being handled. 

The C13 is fitted with large pneuamtic wheels and and a front castor wheel for easy transportation.The C13 housing is constructed from 5mm steel plate which provides the strength and resilience that means this machine will last you a lifetime. 

The RTC-100 from Rock Machinery features a dual chipping system, meaning when the branches are pulled in by the hydraulic feed roller its first met with a conventional rotor with two blades and then the wood is chipped down even further by eight hammers mounted behind the blades. The dual chipping system will make short work of branches and greenery up to 90mm. 

NB: YOU WILL NEED A FORKLIFT / TELEHANDLER TO UNLOAD FROM DELIVERY VEHICLE. PLEASE GET IN TOUCH PRIOR TO PURCHASING FOR ANY DELIVERY QUERIES.