Petrol Chipper Shredders

The wheel-driven GTS1300WD is a self-propelled wood chipper designed for the professional user in the field of tree care and garden maintenance.

Thanks to the battery-powered system (2 x 12V), the machine is easy to move, even over difficult and hilly terrain.  The machine has two forward speeds of 3km/h and 6km/h and two speeds in reverse of 1.5km/h and 3km/h.

Charged with a full battery and equipped with a 420cc Loncin engine, the GTM Professional GTS1300WD will cover a distance of approximately 9.5km on flat pavement or 3km on hilly or muddy ground. The drive system is suitable for slopes up to 15 degrees so you can easily load the machine into a trailer.

Thanks to the two sturdy pneumatic tyres at the rear and two wivel wheels at the front, the GTS1300WD is extremely manoeuvrable. 

Steering is smooth with the handlebar mounted below the input chute. The desired speed can also be determined on the handlebar where you also have a good view of the remaining battery capacity.

This wood chipper has a strong Loncin G420F motor with 15hp power and is suitable for chipping branches up to a diameter of 10cm (dry wood 8cm). The efficient rotor shredding system automatically pulls in the branches and guarantees a high working speed. The PRO blades made of high-alloy steel have an extra long life and are equipped with two cutting edges. When both sides are worn, the blades can possibly be sharpened (always have this done by a specialist).

Just like the standard GTS1300 model, this machine is equipped with various safety features. For example, the GTS1300WD has safety switches on the input and output that block the operation of the machine during (maintenance) work and a safety bar is mounted around the input that immediately stops the machine in emergency situations. In addition, the GTS1300WD meets the strict forestry standard (NEN-EN 13525: 2005 + A2: 2009) to guarantee safe use.

The GTS1300WD comes standard with a 270° rotatable output and hour meter.

A self-propelled wood chipper, the GTS1300RG is equipped with caterpillar tracks to operate on rough and difficult to access terrain. This makes the machine not only suitable for gardens and parks, but also for forestry. The new construction can easily handle steep slopes of up to 20°.

The GTS1300RG is a powerful wood chipper with compact dimensions. The machine fits in a van, on any trailer and easily goes through a standard garden gate.

The 18cm wide track system is powered by a 5.5hp Loncin engine and has three forward gears plus reverse which produces a maximum speed of 4.5km/h.

A recoil start 420cc Loncin engine powers the chipper itself, which features a 111cm high input chute with a 50cm x 28cm opening.

The shredding system consists of a metal drum (rotor) on which two knives are mounted. This works quickly, efficiently and has a high capacity. The system draws in fresh wood with a diameter of up to 10cm (dry wood up to 8cm), after which it is effortlessly shredded into fine wood chips.

The wood chips are thrown high and go straight into a trailer or wheelbarrow via the swivel outlet chute with continuously adjustable deflector up to 85°. The wood chipper comes standard with PRO blades, which last twice as long as regular blades.

The GTM Professional GTS1300RG is certified by TÜV Rheinland and meets the highest safety requirements.

You can easily convert this GTM Professional wood chipper on tracks into a dumper. For this a transformation unit (MZSGTSU02DUMP001) is available. This unit consists of the tipping container and a hydro kit. For converting the wood chipper into a dumper or vice versa, only a hoist and a key 17 are required.

A self-propelled wood chipper, the GTS1300RGE is equipped with caterpillar tracks to operate on rough and difficult to access terrain. This makes the machine not only suitable for gardens and parks, but also for forestry. The new construction can easily handle steep slopes of up to 20°.

The GTS1300RGE is a powerful wood chipper with compact dimensions. The machine fits in a van, on any trailer and easily goes through a standard garden gate.

The 18cm wide track system is powered by a 5.5hp Loncin engine and has three forward gears plus reverse which produces a maximum speed of 4.5km/h.

A electric start 420cc Loncin engine powers the chipper itself, which features a 111cm high input chute with a 50cm x 28cm opening.

The shredding system consists of a metal drum (rotor) on which two knives are mounted. This works quickly, efficiently and has a high capacity. The system draws in fresh wood with a diameter of up to 10cm (dry wood up to 8cm), after which it is effortlessly shredded into fine wood chips.

The wood chips are thrown high and go straight into a trailer or wheelbarrow via the swivel outlet chute with continuously adjustable deflector up to 85°. The wood chipper comes standard with PRO blades, which last twice as long as regular blades.

The GTM Professional GTS1300RGE is certified by TÜV Rheinland and meets the highest safety requirements.

You can easily convert this GTM Professional wood chipper on tracks into a dumper. For this a transformation unit (MZSGTSU02DUMP001) is available. This unit consists of the tipping container and a hydro kit. For converting the wood chipper into a dumper or vice versa, only a hoist and a key 17 are required.

NB: Images for illustration purposes only - shows recoil start model.

** SPECIAL ORDER ITEM ** 

The wheel-driven GTS1800WD is a self-propelled wood chipper for the professional user in the field of tree care and garden maintenance.

Thanks to the battery-powered system (2 x 12V), this machine is easy to move. A full battery can cover a distance of approximagely 6km on level pavement or 2km on hilly or muddy terrain. The system has two forward speeds (3km/h and 6km/h) and two reverse speeds (1.5km/h and 3km/h).

The drive system is suitable for slopes of up to 15°, so you can easily load the machine into a bus or trailer. With two sturdy pneumatic tyres at the rear and two swivel wheels at the front, the GTS1800WD is very manoeuvrable. Steering is smooth with the handlebar bracket mounted below the entry. The desired speed can also be determined on the handlebar bracket and you have a good view of the remaining battery capacity.

This wood chipper has a strong Loncin LC2V80FD gwin cylinder engine of 24hp and is suitable for shredding branches up to a diameter of 12cm (dry wood 1cm). The efficient rotor shredding system automatically pulls in the branches and guarantees a high working speed. The PRO blades made of high-alloy steel have an extra long life and are equipped with two cutting edges. When both sides are worn, the blades can be sharpened (always have this done by a specialist).

The safety of the user is always our top priority. For example, the GTS1800WD has safety switches on the input and output that block the operation of the machine during (maintenance) work, and a safety bracket has been mounted around the input that immediately stops the machine in emergency situations. In addition, the GTS1800WD meets the strict forestry standard (NEN-EN 13525:2020) to guarantee safe use.

The GTM Professional GTS1800WD comes standard with a 270° rotating output and hour meter.

** SPECIAL ORDER ITEM **