GTM Professional GTS1300WD Wheel Driven 10cm Wood Chipper

The wheel-driven GTS1300WD is a self-propelled wood chipper designed for the professional user in the field of tree care and garden maintenance.

Thanks to the battery-powered system (2 x 12V), the machine is easy to move, even over difficult and hilly terrain.  The machine has two forward speeds of 3km/h and 6km/h and two speeds in reverse of 1.5km/h and 3km/h.

Charged with a full battery and equipped with a 420cc Loncin engine, the GTM Professional GTS1300WD will cover a distance of approximately 9.5km on flat pavement or 3km on hilly or muddy ground. The drive system is suitable for slopes up to 15 degrees so you can easily load the machine into a trailer.

Thanks to the two sturdy pneumatic tyres at the rear and two wivel wheels at the front, the GTS1300WD is extremely manoeuvrable. 

Steering is smooth with the handlebar mounted below the input chute. The desired speed can also be determined on the handlebar where you also have a good view of the remaining battery capacity.

This wood chipper has a strong Loncin G420F motor with 15hp power and is suitable for chipping branches up to a diameter of 10cm (dry wood 8cm). The efficient rotor shredding system automatically pulls in the branches and guarantees a high working speed. The PRO blades made of high-alloy steel have an extra long life and are equipped with two cutting edges. When both sides are worn, the blades can possibly be sharpened (always have this done by a specialist).

Just like the standard GTS1300 model, this machine is equipped with various safety features. For example, the GTS1300WD has safety switches on the input and output that block the operation of the machine during (maintenance) work and a safety bar is mounted around the input that immediately stops the machine in emergency situations. In addition, the GTS1300WD meets the strict forestry standard (NEN-EN 13525: 2005 + A2: 2009) to guarantee safe use.

The GTS1300WD comes standard with a 270° rotatable output and hour meter.