Long Reach / Pole Hedge Trimmers

The Hyundai HYPT5200X is a 52cc long reach petrol pole hedge trimmer designed to provide impressive cutting power on hedges that are tall and hard to reach. It provides a considerable reach of two to three metres when fully extended, which can be increased to an arm's reach of four metres when used in conjunction with the one metre extension shaft included.

Featuring a lightweight aluminium shaft, loop handle, the low vibration makes the HYPT5200X a comfortable pole hedge trimmer to use, even for extended periods and the triple split shaft enables easy transportation and storage, capable of being separated in seconds.

The 40cm double-sided reciprocating blade will slice through all types of hedging up to 20mm in diameter with ease. The 14 position / 270 degree pivot head allows trimming at multiple angles to tackle every aspect of your hedges.

The combined length of the tool, when held 1 metre off the ground, is 4 metres allowing you to easily reach the top of tall hedges without having to resort to using a ladder keeping your hedges well presented all over.

Powered by a two-stroke 52cc Hyundai Euro V low emission engine, the HYPS5200X provides impressive cutting power to the 425mm long cutting blade and can tackle the most demanding of hard to reach hedges.

The HYPT5200X features an ergonomic loop handle and anti-vibration system to support a comfortable working position to cut and shape the top and sides of tall hedges.

The padded front handle enables multiple grip positions working at different angles and heights whilst also reducing vibration for increased comfort. A double support harness is also included.

In The Box:

• HYPT5200X hedge trimmer
• Extension bar
• Tool kit
• Double support harness
• 2-stroke mixing bottle
• User manual

With Webb's petrol pole hedge trimmer you can maintain those high, hard to reach hedges with your feet planted firmly on the ground.

The UK-designed PHT26 employs a high capacity 26cc air-cooled, two-stroke engine with a full crankshaft to enable the machine to withstand continuous high-rev operation and maximise torque output for fast and efficient trimming.

Designed with comfort and manoeuvrability to the fore, the Webb PHT26 weighs 6.5kg and combines an an optimised centre of gravity with an effective anti-vibration system and a fatigue-limiting shoulder harness.

At the sharp end is a pair of 42cm double-sided blades with a maximum branch capacity of 25mm. The cutting head is adjustable so you can angle it to deal with the tops of hedges.

The aluminium shaft is fitted with a loop and bar handlebar for firm, positive grip. The shaft also splits to save storage space in the shed.

For greater reach and to avoid the use of a ladder, add the 80cm extension shaft.

In celebration of its 10 year anniversary, Mitox has introduced this special edition dedicated hedge cutter in the form of the 26LH-SP, which for domestic use offers unbeatable performance and value for money.

The Mitox 26LH-SP long reach hedge trimmer is equipped with a powerful 25.4cc engine featuring a primer bulb for exceptionally easy starting. With an impressive overall reach of over 12 feet, the 440mm reciprocating double-sided blade has 150 degrees of articulation so it is designed leave the perfect finish on high, low and sides of hedges.

Thanks to the aluminium coupling on the split-shaft system, the machine can be easily separated into two for convenient storage or transportation.

If you've got long and tall hedges, then this pole petrol hedge trimmer from Cobra Garden will be right up your garden path! It is designed for domestic use.

The LRH26C is powered by Cobra's own 26cc two-stroke engine which provides all the power you need, producing consistently strong power delivery together with state of the art engine technology, whilst achieving reduced fuel consumption and industry-leading low emission levels.

With an overall machine length of 251cm, the engine on the Cobra LRH26C serves as a counterweight to the cutter bar enabling you to safely trim and maintain high hedges with your feet firmly on the ground. The solid straight shaft is equipped witha d-loop handle and a 62cm double-sided reciprocating cutting blade which is ideal for shaping your hedge. Thanks to the wide 30mm tooth spacing, you can tackle even thumb-sized branches with ease. Greater versatility to cut the top of your hedges is provided by the 135 degree articulating cutting head. The protective guard helps shield the operator from getting too close to the working end of the machine, whilst the ergonomically-positioned controls and single shoulder harness make safe operation even comfortable.

The Cobra LRH26C long reach petrol hedge cutter is lightweight to use and offers fantastic value for money for homeowner use. For heavier, more regular use, you should consider the Kawasaki-powered LRH26K.

The Mitox 28LH Select is a quality long reach hedge trimmer powered by a 25.4cc, full-crank two-stroke engine. With its long reach, and adjustable articulating double sided, double reciprocating 580mm blade, tall hedges can be trimmed safely without the use of a ladder.

The engine benefits from an effective anti-vibration system, and with a weight of just 6.9kg, the Mitox 28LH Select can be used for long periods of hedge cutting with minimal operator fatigue.

Another benefit of the 28LH hedge cutter is its ability to articulate the head through 180º, via an advanced adjustment design, making storage and transport simple, as well as giving greater flexibility during use.

The padded foam front handle provides a comfortable grip and reduces vibration. The split shaft design also enables easy storage and transport. A single strap shoulder harness is included.

A lightweight, powerful and robust pole hedge cutter, the Oleo-Mac BC 241 H gives you the confidence to tackle all types of hedge, no matter how high or dense, without the use of a ladder.

The Oleo-Mac BC 241 HC professional hedge trimmer with its three quarter length shaft features a 55cm blade with 35mm tooth spacing , giving an overall length of 1.8m. The blade articulates through through 11 positions from 0º to 180º for maximum working flexibility. 

Quality blades and gearbox ensure consistent long-term efficiency and maximum productivity with the minimum effort. The steel blades are adjustable to any operating situation.  The lightweight magnesium gear case, drive linkage with pinion carried in bearings and rods with rollers, all combine to deliver long life, low noise and minimal vibration. The primer system facilitates cold starting. A digital coil with electronic rpm limiter ensures that mechanical output remains constant at any engine speed. Ignition advance aids easy starting and low fuel consumption, whilst the anti-vibration system ensures isolation of the handles.

The ergonomic and comfortable handle on the BC 241 HC is equipped with a safety switch designed to stop the tool immediately if the user loses grip.

The HCAS-236ES LW is an ultra lightweight articulating hedge cutter with a lightweight gearcase, a light and durable cutter blade assembly and easy one-handed blade angle adjustment. It features low vibration technology, a 21.2cc engine and Easy Start. With a 519mm cutter that can be rotated through 90°, it’s ideal for trimming tall and wide hedges. The 5.9kg pole hedge trimmer has an overall length of 1749mm, whilst the short reach shaft provides ease of use during operation.

A culmination of years of unique and innovative developments, Easy-Start works to minimise the effort required to start the engine with greatly reduced pulling power and no kick-back effect.  In most cases, the effort required to pull the starter is reduced by up to 50% compared to standard models.

Echo first invented and produced the long reach hedge trimmer, and each model has gone from strength to strength. The Echo HCAS-236ES LW is a commercial-grade mid reach hedge cutter with low vibration and smooth running. It is perfectly suited to professional users, prosumers and homeowners for trimming tall and wide hedges

Perfectly balanced, lightweight and easy to control, Echo hedge cutters deliver unmatched performance and enduring reliability. All Echo hedge cutters have been developed for total operator comfort - allowing you to get on with the job in hand.

Manufactured in Japan and powered by Kawasaki, the Harry mid-sized PH270S has a 1100mm shaft and is suitable for both commercial and homeowner use.

The powerful 26.3cc Kawasaki two-stroke engine delivers a maximum output of 0.77kW and is well matched to the heavy-duty gearbox.

Its 21"/52cm double reciprocating blades are triple edged, laser-cut, hardened chrome and provide a superior finish when cutting hedges and bushes. The easy to grip handwheel allows quick and easy adjustment of the cutting head and enables the head to fold back for easy transportation and storage.

Weighing just 6.1kg the PH270S is well-balanced, while the ergonomically positioned handle and controls provide a pleasant working experience.

A lightweight, powerful and robust pole hedge cutter, the Oleo-Mac BC 241 HCL with full shaft  gives you the confidence to tackle all types of hedge, no matter how high or dense, without the use of a ladder.

The Oleo-Mac BC 241 HCL professional hedge trimmer features an overall length of 2.4m and 55cm blade with 35mm tooth spacing which articulates through 11 positions from 0º to 180º for maximum working flexibility.

Quality blades and gearbox ensure consistent long-term efficiency and maximum productivity with the minimum effort.  The steel blades are adjustable to any operating situation. The lightweight magnesium gear case, drive linkage with pinion carried in bearings and rods with rollers, all combine to deliver long life, low noise and minimal vibration. The primer system facilitates cold starting. A digital coil with electronic rpm limiter ensures that mechanical output remains constant at any engine speed.  Ignition advance aids easy starting and low fuel consumption, whilst the anti-vibration system ensures isolation of the handles.

The ergonomic and comfortable handle on the BC 241 HCL is equipped with asafety switch designed to stop the tool immediately if the user loses grip.

The HCA-236ES LW is an ultra lightweight articulating hedge cutter with a lightweight gearcase, a light and durable cutter blade assembly and easy one-handed blade angle adjustment. It features low vibration technology, a 21.2cc engine and Easy Start. With a 519mm cutter that can be rotated through 90° it’s ideal for trimming tall and wide hedges. The 6.2kg pole hedge trimmer has an overall length of 2407mm.

A culmination of years of unique and innovative developments, Easy-Start works to minimise the effort required to start the engine with greatly reduced pulling power and no kick-back effect.  In most cases, the effort required to pull the starter is reduced by up to 50% compared to standard models.

Echo first invented and produced the long reach hedge trimmer, and each model has gone from strength to strength. The Echo HCA-236ES LW is a commercial-grade long reach hedge cutter with low vibration and smooth running. It is perfectly suited to professional users, prosumers and homeowners for trimming tall and wide hedges

Perfectly balanced, lightweight and easy to control, Echo hedge cutters deliver unmatched performance and enduring reliability. All Echo hedge cutters have been developed for total operator comfort - allowing you to get on with the job in hand.

Manufactured in Japan and powered by Kawasaki, the Harry PH270LS pole hedge cutter has a long 1500mm shaft which makes it ideal for cutting tall and deep hedges, and is suitable for both commercial or homeowner use.

The powerful 26.3cc Kawasaki two-stroke engine delivers a maximum output of 0.77kW and is well matched to the heavy-duty gearbox.

Its 21"/52cm double reciprocating blades are triple edged, laser-cut, hardened chrome steel and provide a superior finish when cutting hedges and bushes. The easy to grip handwheel allows quick and easy adjustment of the cutting head and enables the head to fold back for easy transportation and storage.

Weighing just 6.3kg the PH270LS is well balanced, while the ergonomically positioned handle and controls provide a pleasant working experience.

The HCA-265ES-HD is a long reach articulating hedge cutter with an overall length of 2446mm. This means the hedge cutter is perfect for trimming tall and wide hedges with less reliance on ladders and platforms.

Features a heavy duty gearcase with needle bearings caged in the cutting head, providing added durability and less downtime.

The adjustment system enables the blade angle to be rotated through 135° only using one hand.

Each cutter blade has three sharp edges. This gives a sharp, clean finish.

The HCA-265ES-HD has a 25.4cc engine and Easy Start for fast, almost effortless starting.