Garden Trailers & Carts

SCH Supplies has developed yet another new innovation which is purpose-built for use by gamekeepers and ghillies for the purpose of animal retrieval.

This fenn trailer is available in various sizes and is supplied complete with large flotation pneumatic wheels so it is easy to manoeuvre over rough or boggy terrain. The trailer body and base are made of sprayed mesh, as is the integral loading ramp, which makes it easy to clean down with a pressure washer after use.

The body of the trailer is 90cm wide and 120cm long and the trailer has a 500kg carrying capacity. 

SCH can build other sizes and specifications to order. SCH can supply this utility trailer as an off-road trailer or it can be adapted for the road.

A 50mm ball hitch is fitted as standard.

Optional extras:-

• Ramp/tail gate (shown in image 2)
• Winch
• Galvanising

Please contact The Green Reaper or SCH Supplies on 01473 328272 for advice and prices.

A good, strongly constructed timber bodied trailer for use behind garden tractors and ATVs. The sides are hinged and can be completely removed along with the tailgate if required to give a platform body with a fixed head board.

The GWTS10 features a welded steel frame clad with highly durable phenol-coated ply. This coating resists water and helps to prevent rot. Galvanised steel rails run along the top of the wooden sides and tailboard to protect the edges of the ply. The axle is built from a solid steel 1" thick shaft, as opposed to inferior hollow tubing used by many alternative trailer manufacturers. 

The two sides and back can fold down for ease of loading and unloading. Galvanised hinges are attached to the sides and tailboard and, when the securing mechanism is undone, these hinges can easily slide off.

A simple to use sprung-pin mechanism releases the trailer and allows it to tip. The pivot point of the trailer is roughly underneath the centre, which allows for very easy tipping and emptying. The tailgate is removable for the efficient discharge of material when tipped. The galvanised tailgate securing mechanism can be quickly released and relatched.

The trailer is fitted with wide profile pneumatic tyre wheels complete with bearings. These have a significant surface contact area, making the trailer extremely stable under load. The wide wheels also minimise track marks on the grass.

Optional Extras (see related items below):-

• 50mm ball hitch
• Four easily removable 300mm (12") high extension sides (shown in photograph) may be fitted (ref GWTX10)

Please note: Photographs for illustration purposes only - does not include optional extension sides which may be purchased and fitted separately for additional carrying capacity.

This SCH plastic bodied tipping trailer runs on large four-stub flotation wheels which are designed for use with an ATV at the extra width of the wheels increases stability at higher speeds. These bearing hubs are able to tolerate tight corners found in stable yards, walled gardens, etc, when fully loaded without damage to the heavy-duty axle. These specially mounted wheels are a must when operating on soft ground conditions or across unfriendly terrain.

The sturdy metal chassis gives superb support to the underside of the rot-proof trailer body.   A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle (or for hand reversing for those of us who find reversing the tractor or quad impossible!).

The body of the QPTP is moulded from a strong commercial-grade plastic so it will withstand the carting of corrosive material, such as animal waste, without causing body rot.

The QPTP plastic bodied trailer with wide profile wheels is fitted with 50mm ball hitch as standard.

A two-wheeled, timber bodied tipper trailer with a large 760kg (15cwt) carrying capacity. The tailgate and sides are easily removed to give a generous sized platform truck with a fixed head board. 

The GWTS15 features a welded steel frame clad with highly durable phenol-coated ply. This coating resists water and helps to prevent rot. Galvanised steel rails run along the top of the wooden sides and tailboard to protect the edges of the ply. The axle is built from a solid steel 1" thick shaft, as opposed to inferior hollow tubing used by many alternative trailer manufacturers. 

The two sides and back can fold down for ease of loading and unloading. Galvanised hinges are attached to the sides and tailboard and, when the securing mechanism is undone, these hinges can easily slide off.

A simple to use sprung-pin mechanism releases the trailer and allows it to tip. The pivot point of the trailer is roughly underneath the centre, which allows for very easy tipping and emptying. The tailgate is removable for the efficient discharge of material when tipped. The galvanised tailgate securing mechanism can be quickly released and relatched.

The trailer is fitted with extra wide profile pneumatic wheels complete with bearings. These have a significant surface contact area, making the trailer extremely stable under load. The wide wheels also minimise track marks on the grass.

Optional Extras (see related items below):-

• 50mm ball hitch (BH)
• Extension sides (GWTX15) - four easily removable heavy duty 450mm (18") high extension sides may be purchased separately

Please note: Photographs for illustration purposes only - does not include optional extension sides which may be purchased and fitted separately.

The SCH galvanised tipping dump trailer is fitted with wide profile flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

Based on the GDTT, the handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing. 

Optional 12" extension sides may be fitted to the trailer (Ref: QDTX - see related items below).

The large plastic trailer fills a gap in SCH's comprehensive trailer range, where a bulk, rot proof, transporter is required. 

The SCH LCPTP is built from tough tear-proof and corrosionn resistant plastic, ideal for corrosive horse muck and garden waste.

The wide profile flotation wheels, on four stud roller bearing hubs, fitted as standard, give the trailer stability over rough or wet ground. The chassis is built of strong steel, giving the plastic body the necessary support. A metal buffer is fitted around the top roll of the trailer.

The trailer tipping device is simple to operate; simply pull the sprung-loaded bolt to allow the trailer to tip. An extendable tipping handle makes the tipping operation an easy task.

The towing hitch is a 50mm ball coupling. Other hitches are available upon request.

A four wheel, turn table trailer with a towing or manual manoeuvring facility fitted as standard. Hook it up to your trailer with the standard clevis hitch provided, or upgrade to a ball hitch attachment which can be fitted as an optional extra. The trailer also features as a standard fitting a hand pull handle which simply clips into the clevis hitch. These two pulling positions make the trailer a very useful dual purpose unit with a carrying capacity of 760kg (15cwt). 

The welded steel frame is clad with highly durable pnenol-coated ply. This coating resists water and helps prevent rot. The head board is fixed and the two sides and tailgate are hinged and can be dropped down for ease of loading and for transporting oversized objects. The sides and tailgate can also be removed to make a platform trailer.

The wide profile wheels being mounted under the chassis allow the sides to drop down unhindered and are fitted with bearings as standard. They are also very stable and minimise track marks on the grass.

Optional Extras (see related items below):-

• Four easily removable heavy duty 450mm (18") high extension sides (Ref: GWTX415). Self-fitting, some tools will be needed for the fitting of the extension sides.
• 50mm ball hitch

The SCH large capacity galvanised tipping trailer is fitted with flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

The tailgate of the QDGT is removable to make emptying a simple task.

The body specification is the same as the Large Capacity Galvanised Dump Trailer (Ref: GT/GALV).

The SCH bin trailer is used on a variety of sites where waste bins have to be collected and transported to a central disposal point. Caravan parks and zoos are among the type of public areas with this requirement.

This bin trailer has a 500kg (10cwt) carrying capacity and measures 1100mm (43") wide by 1400mm (55") long. The tailgate measures 870mm (34") long.

SCH bin trailers can be manufactured to the customer's own requirements. Galvanised finish can be supplied in lieu of the standard paint finish.

Optional Extras:-

• 50mm ball hitch
• Jockey wheel
• Winch

The GATV trailer from SCH is designed to tow mainly behind all terrain vehicles.  It can also be used with compact and large garden tractors.

With a carrying capacity of 500kg (10cwt), this ATV trailer has 12" high sides and the tailgate is hinged.  The mudguards run the who length of the trailer to give extra carrying capacity for loads such as hay and straw bales, and oversized loads.

The trailer has large flotation wheels with four-stub hubs, giving it huge stability when towed at ATV speeds.

The trailer is fitted with a 50mm ball hitch as standard. Other hitch types are available.

Optional extras:-

• Four 450mm (18") extension sides
• Four 915mm (36") extension sides 
• Loading ramp GATVLR (order at time of purchase only)

Please call us to ask about the following optional extras:

• Jockey wheel
• Animal cage
• Water tank
• Lights

The SCH timber hauler is an ideal tool to haul around wood etc, from wooded areas.  The hauler can be used behind an ATV, garden tractor or a 4X4. The four floatation wheels with their wide profiles mean that the hauler can be used on soft ground.  The guards over the wheels prevent brush wood from getting tangled in the wheels. 

If required, a board can be placed on top of the chassis to convert it to a flat bed cargo carrying trailer. A 50mm ball hitch, and a jack leg are fitted as standard.

This heavy load mover is a fine example of SCH imangineering build! Simple yet brilliant, it has too many uses to mention.

How to operate:-

• Remove the base
• Reverse the chassis/frame over the load
• Attach the hydraulic lift arem to the load
• Lift the load and replace the floor underneath the load
• Lower the load onto the floor and secure
• Drive away!

With a carrying capacity of 1000kg, the SCH heavy load mover has an overall width of 200cm (80") and overall length (including tow bar) of 244cm (96"). It is fitted with a 500mm ball coupling, but other hitches are available on request.

This model is a four wheel unit for off-road use. SCH are currently designing an on-road version.