Garden Trailers & Carts

SCH has introduced a budget range of four wheel turn table trolleys.  The largest in the range, with a carrying capacity of up to 500kgs (10cwt) is ideal for smallholders, builders, stables, etc.

The trolleys features a hard-wearing phenol-coated plywood bed and runs on four 400 x 8 pneumatic wheels with bearings. The turntable mechanism allows the front two wheels to turn, preventing the wheels from scuffing the grass when turning.  The design of the handle allows the trolley to be pulled by hand or mechanically towed. 

300mm (12") head boards may be added as an optional extra. 

This innovative trailer has the same characteristics as a balance cart but with one important factor - it can either be manually pushed or it can be towed. The support leg is removed and replaced with a tow bar. In either mode, the sides can be hinged down and can also be removed.

The wheels being mounted in board makes this a useful load carrier where there are width restrictions.

The trailer has a carrying capacity of 500kg (10cwt) with a body width of 76cm and body length of 150cm.

Use your lawn tractor all year round to transport heavy and/or bulky loads around your garden the easy way with this quality tow-behind tipping cart from Agri-Fab.

The 45-0553 towed garden cart has a substantial 1000lb / 18 cubic foot heaped load capacity and is supplied with a universal hitch pin which can be attached to most tractor drawbars.

The robust poly bed sits on a heavy-duty welded frame which has 1" square tubing, whilst the 16" pneumatic turf tread tyres with powdered metal bearings allow for easy manoeuvrability over rough terrain.

The Agri-Fab 45-0553 features a latch system to easily dump the bed contents. Not only does the trailer tip at a 52 degree dump angle, the cart also swivels up to 110 degrees so you can empty the load exactly where you want it.

The body being moulded from a strong commercial grade plastic means this trailer will stand the carting of corrosive material (animal waste etc) without causing body rot. Being plastic, the trailer can be stored outside without deterioration.

The trailer has a simple tipping mechanism for easy emptying. The two wide profile roller bearing pneumatic wheels help to reduce wheel marks on soft surfaces.

A manual handle is fitted as standard to assist in manoeuvring the trailer when used away from the towing vehicle.

Optional Extra (see related items below):-

• 50mm ball hitch

Special features of this tipping trailer are its hard-wearing galvanised finish and wide profile wheels which come complete with bearings to prolong their life.

The wide wheels mean that 'track marks' are kept to a minimum. A manual push/pull handle is fitted to all SCH dump trailers to make them easy to manoeuvre when used away from the tractor. The manual handle is a must for those of us who find reversing difficult or even impossible.

The sprung-loaded pin secures the trailer automatically when returning from the tipped position.

Optional Extras (see related items below):-

• 300mm (12") bolt on heavy duty mesh extension sides
• 50mm ball hitch

Let your ride-on mower or ATV take the strain of hefty loads with the Agri-Fab 45-0579 poly cart.

The trailer comprises a strong poly bed on a heavy-duty welded frame with 1" square tubing. The extra large 18" x 8.5" all terrain pneumatic tyres with grease zerks allow easy manoeuvrability and maintenance. The welded wheel supports and high clearance allow you to transport loads over rough terrain.

The 45-0579 cart has a considerable 1000lb load capacity, equivalent to 453kg or 18 cubit foot heaped capacity.

The 110° swivel feature and 56° tipping angle allow you to dump the load exactly where you need it. The quick release lever allows for easy dumping. 

The versatile clevis hitch attaches to most makes of ATV, UTV or tractor drawbar, whilst the sturdy latch pin keeps the bed secure, even over bumps and ruts.

Styled on the popular plastic bodied trailer, the SCH trailer barrow features a strong, moulded, rot proof plastic body with a 500kg (10cwt) carrying capacity. The PTPTB is perfectly suited for mucking out stables before being driven to the muck heap.

The barrow handles are incorporated in the chassis, with an additional tow bar to allow the barrow to be towed when required. The sturdy metal chassis gives superb support to the undeside of the trailer body. The body is moulded from a strong commercial-grade plastic, so it will withstand the carting of corrosive material such as animal waste.

Optional extras:-

50mm ball hitch

A strongly constructed transport box from SCH with tipping facilities.  The tailgate is removable fore ease of emptying and loading.

The SCH GT/GALV has a large 500kg (10cwt) capacity ideal for transporting bulky loads of leaves, grass cuttings, logs, compost, etc.  

This robust metal bodied dump trailer is designed to tow behind compact and large garden tractors. 

The tailgate is hinged and removable to make emptying when tipped a simple task.

Optional Extra (see related items below):-

• 50mm ball hitch

SCH Supplies has developed yet another new innovation which is purpose-built for use by gamekeepers and ghillies for the purpose of animal retrieval.

This fenn trailer is available in various sizes and is supplied complete with large flotation pneumatic wheels so it is easy to manoeuvre over rough or boggy terrain. The trailer body and base are made of sprayed mesh, as is the integral loading ramp, which makes it easy to clean down with a pressure washer after use.

The body of the trailer is 90cm wide and 120cm long and the trailer has a 500kg carrying capacity. 

SCH can build other sizes and specifications to order. SCH can supply this utility trailer as an off-road trailer or it can be adapted for the road.

A 50mm ball hitch is fitted as standard.

Optional extras:-

• Ramp/tail gate (shown in image 2)
• Winch
• Galvanising

Please contact The Green Reaper or SCH Supplies on 01473 328272 for advice and prices.

A good, strongly constructed timber bodied trailer for use behind garden tractors and ATVs. The sides are hinged and can be completely removed along with the tailgate if required to give a platform body with a fixed head board.

The GWTS10 features a welded steel frame clad with highly durable phenol-coated ply. This coating resists water and helps to prevent rot. Galvanised steel rails run along the top of the wooden sides and tailboard to protect the edges of the ply. The axle is built from a solid steel 1" thick shaft, as opposed to inferior hollow tubing used by many alternative trailer manufacturers. 

The two sides and back can fold down for ease of loading and unloading. Galvanised hinges are attached to the sides and tailboard and, when the securing mechanism is undone, these hinges can easily slide off.

A simple to use sprung-pin mechanism releases the trailer and allows it to tip. The pivot point of the trailer is roughly underneath the centre, which allows for very easy tipping and emptying. The tailgate is removable for the efficient discharge of material when tipped. The galvanised tailgate securing mechanism can be quickly released and relatched.

The trailer is fitted with wide profile pneumatic tyre wheels complete with bearings. These have a significant surface contact area, making the trailer extremely stable under load. The wide wheels also minimise track marks on the grass.

Optional Extras (see related items below):-

• 50mm ball hitch
• Four easily removable 300mm (12") high extension sides (shown in photograph) may be fitted (ref GWTX10)

Please note: Photographs for illustration purposes only - does not include optional extension sides which may be purchased and fitted separately for additional carrying capacity.

This SCH plastic bodied tipping trailer runs on large four-stub flotation wheels which are designed for use with an ATV at the extra width of the wheels increases stability at higher speeds. These bearing hubs are able to tolerate tight corners found in stable yards, walled gardens, etc, when fully loaded without damage to the heavy-duty axle. These specially mounted wheels are a must when operating on soft ground conditions or across unfriendly terrain.

The sturdy metal chassis gives superb support to the underside of the rot-proof trailer body.   A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle (or for hand reversing for those of us who find reversing the tractor or quad impossible!).

The body of the QPTP is moulded from a strong commercial-grade plastic so it will withstand the carting of corrosive material, such as animal waste, without causing body rot.

The QPTP plastic bodied trailer with wide profile wheels is fitted with 50mm ball hitch as standard.