Sports Surface Equipment

This artificial surface levelling rake is ideal for use on sand-filled basis and light organic surfaces.  When used regularly to level, it will form part of your maintenance programme to keep surfaces in good condition and help with surface drainage.  A bank of rake heads mounted under an open mesh framework are easily visible.

Other sizes as an optional brush are available upon request. 

The SCH rubber drag mat is constructed from moulded rubber with a galvanised towing bar.  It is ideal for use on most surfaces, both natural and artificial.  The rubber matting lessens surface damage that may be caused by heavier metal units.

The SCH chemical applicator is fitted to the carrier frame to apply required chemical to long fibre synthetic sports surfaces, of which 3G is the most common at this time.

The chemical is applied by dribble/drip bar mounted in front of the row of scarifying tines, in order to apply the chemical and then the tines will open up the surface to allow the prescribed chemical to reach the required areas.  Flow rates can be adjusted to suit the required application rate.

Power to the pump is supplied from the towing unit.  An independent battery may be fitted if required.

New from SCH, the Scari-Brush Groomer is ideal for both artificial and natural sports surface maintenance.

This is a two wheel unit comprising of two brushes; the first is a scarifying brush which has an easily adjustable bar fitted that can be raised or lowered to ensure the exact level of stiffness and aggression required. This brush decompacts and evens out infill. Following behind is a gentler grooming brush, which straightens the pile and a fine, play-ready finish to the surface. This rear brush may be removed if required.

The unit is fitted with a weight tray compete with a 25 litre water tank meaning the level of aggressiveness can be further fine tuned. The brushes can be lifted out of work for transportation.

The Scari-Brush Groomer comes complete with a clevis hitch but a ball hitch can be fitted as an optional extra.

SCH can also quote for wider versions of this unit and for three point linkage.

This artificial surface grooming rake is a small, basic machine designed to carry out routine maintenance on artificial playing surfaces with a sand base. It features two rows of staggered spring tines which tease through the playing surface to remove surface compaction and aid drainage.

The SCH artificial surface rake features a weight tray which allows top weight to be added to increase penetration on heavily compacted surfaces. The trailing brush will level and groom the play area, leaving it in a ready state for many hours of hard use.

With a 120cm (48") working width, each row of tines can be lifted out of work individually to suit your grooming requirements. For example, you can remove the two spring tine rows and leave just the brush in work.

This grooming rake is suitable for towing behind 13hp lawn tractors and above. It can be lifted out of work for simple and safe transportation to the storage area.

A clevis hitch is fitted as standard. A 50mm ball hitch can be fitted as an optional extra.

SCH can also supply different working widths to order - price on application.

This towed folding brush from SCH Supplies ensures a thorough grooming operation to help you maintain your sports surface.  

The unit consists of three sections of brushes with a a generous ground contact width of 152mm (6") and overall working width of 365cm (144").  The outer two sections can be folded up to reduce the working width to 122cm (48").

The folding brush unit can easily be towed to the work area on a transport wheeled frame which is also supplied. It comes with a clevis hitch fixing as standard, suitable for towing behind most makes of lawn tractor. An optional ball hitch fixing can be purchased at the time of ordering. 

Supplied in two forms, a three-point linkage version of the folding brush unit is also available.

Sweeping your sports surface just got a whole lot easier with this folding brush from SCH Supplies which gives a thorough grooming operation. This three point linkage version comes into its own as it can be raised at run ends and lifted to reverse into corners.

The unit consists of three sections of brushes with a a generous ground contact width of 152mm (6") and overall working width of 365cm (144").  The outer two sections can be folded up to reduce the working width to 122cm (48").

The folding brush unit can easily be towed to the work area on a transport wheeled frame which is also supplied. 

A towed model is also available with a clevis hitch fitted as standard.

This SCH triangular brush gives artificial play areas as well as natural surfaces that vital 'scratch' in between major services.  The wheels on the upper side of the brush make it easy to transport to your storage area; simply turn the brush onto the wheels.

A weight tray is incorporated in the design in order that top weight may be added to aid penetration on heavily compacted surfaces. The weight tray can also be used to transport tools and equipment.

Other widths are available upon request.

This three point linkage artificial surface grooming rake is designed to carry out routine maintenance on artificial playing surfaces with a sand base. It features two rows of staggered spring tines which tease through the playing surface to remove surface compaction and aid drainage.

The SCH artificial surface rake features a weight tray which allows top weight to be added to increase penetration on heavily compacted surfaces. The trailing brush will level and groom the play area, leaving it in a ready state for many hours of hard use.

With a 180cm (71") working width, each row of tines can be lifted out of work individually to suit your grooming requirements. For example, you can remove the two spring tine rows and leave just the brush in work.

This grooming rake is suitable for towing behind 13hp lawn tractors and above. It can be lifted out of work for simple and safe transportation to the storage area.

SCH can also supply many different working widths to order - price on application.

The three-point linkage mounted triangular brush is designed for use on both artificial and grass surfaces, giving it that vital 'scratch' in between major services.

The advantages of the 3TMB2 include being able to be lifted up to reverse into corners or tight spaces, and can be lifted out of work at row ends to keep stripes uniform and looking their best.

The brush tickles over the surface to enhance the quality and appearance of the area. Look no further if you desire that much sought after striping.

The brushes can be easily replaced when worn. Other widths are available upon request. 

This dedicated towed grooming brush from SCH has a working width of 1200mm (48") and performs two functions:-

The stiff yellow brush teases into the matting, raising the surface to keep the pores open to encourage the drainage and allow air into the depth of the mat to prevent algea build up. The two rows of brushes have a cross bar system which adjusts the flex of the bristles. The brush can be lifted out of work easily for turning and transport from the driver's postition.

This dedicated towed grooming brush from SCH has a working width of 1200mm (48") and performs two functions:-

The stiff yellow brush teases into the matting, raising the surface to keep the pores open to encourage the drainage and allow air into the depth of the mat to prevent algea build up. The two rows of brushes have a cross bar system which adjusts the flex of the bristles. The brush can be lifted out of work easily for turning and transport from the driver's postition.

Widths up to 1800mm (72") can be manufactured on request.