Towed Sweepers, Collectors & Leaf Blowers

This large capacity leaf collector has been developed by SCH to tow behind lawn tractors having the description known as "twin cut".  Other machines can be adapted on request.

Lawn tractors have a centre rear discharge that blows the cut grass and leaves into a limited size hopper, which results in frequent emptying and can become time consuming and frustrating.  The advantage of the TRCL is that it greatly increases the collecting capacity so that larger areas can be collected in one fill, thus reducing the amount of time and labour required.

The TRCL features a powerful motorised fan unit which is mounted on the front and sucks up the green waste from the cutter deck, then propels it to the trailer.  The trailer has a low centre of gravity, which makes it extremely stable on hilly ground.  Wide pneumatic wheels greatly reduce wheel markings on soft ground. It has now been iftted with a small trasnportwheel to the bottom of he foot stand.

The fan on the unit is belt-driven to protect the engine should a blockage occur.

This SCH large capacity trailed collector is also suitable for use on level tarmac and gravel surfaces.

Optional Accessory

A wandering hose kit is optional.  The suction/delivery hose has a diameter of 200mm / 8". 

Side discharge cutter decks can be fitted with a 'boot' to accept the collection hose. 

Product ref: TRCLH

Please see related items below.

This large leaf suction unit from SCH has a big appetite to clear up large areas of fallen leaves. The PSU fan unit boasts a powerful 9hp Honda engine and is mounted on a two-wheel chassis with an integral tow bar complete with hand-held collection nozzle. The fan is belt driven and not fitted directly onto the crankshaft of the engine.

The preferred way of using this leaf suction unit is to attach it to the rear of the leaf collecting trailer. This trailer can be supplied with the trailer adaptation kit - it is up to you whether you modify your own trailer or we can arrange for SCH to collect and modify it for you.

The discharge hose is attached to the rear of the trailer allowing the user to set to sucking up fallen leaves fast. The hand-held suction hose has skid rails on the tube end for ease of operation.  The large diameter suction hose reduces the risk of blockages. A combined team of the suction hose operator and a person driving the lawn tractor can clear along drives and road edges at very impressive speeds.  The leaves passing through the fan are chopped up, greatly increasing the capacity of the trailer and reducing the amount of empties.  Many operators use this equipment in conjunction with a hand-held blower to suck out leaves from flower beds before collecting them with the suction unit.

The SCH professional leaf suction unit is brilliant in places where conventional suction sweepers are unable to operate, such as under benches, around borders, along the edge of drives, etc.

The PSU can be supplied as a package, consisting of a trailer of your choice, plus a powerful suction unit.  The suction unit can be mounted either on a two-wheel trolley (as illustrated) or placed directly onto the back of the trailer. Additional hose can be purchased in 1 metre lengths (see related items).

Important: Images are for illustration purposes only.

The trailer shown in the images above is the GWTS15 with mesh sides and trailer kit accessories. 

The EPB has been built to reduce the manual collection of horse droppings and improve pasture management.

Suitable for use with most garden tractors and ATVs. Four rows of tough propropelene brushes that can sweep horse droppings, wet / dry grass and leaves. The brush height can be easily adjusted.

The regular removal of droppings promotes healthy grass and helps reduce droppings related diseases. Four rows of height adjustable brushes rotate at variable speeds to flick the droppings into the rot proof rear collecting box. The brushes are driven by a 5.5hp Honda engine equipped with a speed reduction gear box which incorporates a centrifugal clutch, this means when the engine speed is reduced the brushes stop revolving, a necessary feature when moving from heap to heap.

The Equestrian Powered Brush can also be used for other sweeping tasks e.g. car parks etc. The tow hitch is fitted with a 50mm ball hitch.

The unit has four pneumatic wheels; the collection box is made of strong plastic material, mounted on heavy tubular frame, thus making this a durable machine for many years use.

The brushes are easily changed when they become worn.

Optional extras:

• Clevis hitch
• Ball hitch

An ideal combination of power and size, at 2,100cfm of commercial suction, the Billy Goat DL1302HEU debris loader is perfect for small to mid-size jobs and crews. Light weight and low overall cost, this machine will get you into the game of production leaf or debris removal.

A dual shredding 36cm (14.25”) diameter armor plate impeller with Piranha™ blade that reduces debris up to 12:1 and maximises trailer loading across multiple properties before dumping, saves you time and dump fees. The DL1302HEU has CustomFit™ features that allow you to customise the loader to your truck. In addition, the unit can be mounted in one of three ways: Tailgate mounted with optional hanger kit; truck hitch mounted with the optional swing away hitch; or skid mounted to a trailer or truck.

The 20cm (8”) intake hose is a 300cm (10’) long, best in class, clear poly helical coil so your crew can visually see if a blockage occurs, for quick fix. A replaceable steel liner and 12-gauge housing is standard for long life and durability.

The PSUST is a slow-tow version of the PSU.  The two-wheel chassis is complete with suspension units and required lighting. 

The hand-held suction nozzle is fitted to three meters of 200mm diameter hose.

The discharge is via a metal tube with a swivel base to allow the direction to be altered. The discharge head is also adjustable.

A jockey wheel and 50mm ball hitch is fitted as standard.

The fan belt is driven and not fitted directly onto the crankshaft of the engine.

Keep your sports and hard surface areas free from debris with this tow-behind hard surface powered sweeper from SCH Supplies.

The sweeper is powered by a 5.5hp Honda engine and fitted with a speed reduction gear box. The brushes are height adjustable so the sweeper can be set with great accuracy to apply the exact level of lightness or firmness you need. Equipped with a centrifugal clutch, the engine speed is reduced when the brushes stop revolving, which is ideal for tight turns at the end of a run. Featuring a working width of 90cm (35½"), the debris is collected into a spacious 270 litre catcher.

A mesh floor is perfect for use on sand-filled or 3g surfaces when you need the sand to pass back onto the surface by passing through the mesh. Stones, twigs and leaves will be retained by the mesh floor. A solid cover to the mesh is also supplied in order that hard surface athletic tracks, tennis courts, etc, can be cleared entirely of even the smallest of debris, including sand.

This large leaf suction unit from SCH has a big appetite to clear up large areas of fallen leaves. The PSU fan unit boasts a powerful 9hp Honda engine and is mounted on a two-wheel chassis with an integral tow bar complete with hand-held collection nozzle. The fan is belt driven and not fitted directly onto the crankshaft of the engine.

The preferred way of using this leaf suction unit is to attach it to the rear of the leaf collecting trailer. This trailer can be supplied with the trailer adaptation kit - it is up to you whether you modify your own trailer or we can arrange for SCH to collect and modify it for you.

The discharge hose is attached to the rear of the trailer allowing the user to set to sucking up fallen leaves fast. The hand-held suction hose has skid rails on the tube end for ease of operation.  The large diameter suction hose reduces the risk of blockages. A combined team of the suction hose operator and a person driving the lawn tractor can clear along drives and road edges at very impressive speeds.  The leaves passing through the fan are chopped up, greatly increasing the capacity of the trailer and reducing the amount of empties.  Many operators use this equipment in conjunction with a hand-held blower to suck out leaves from flower beds before collecting them with the suction unit.

The SCH professional leaf suction unit is brilliant in places where conventional suction sweepers are unable to operate, such as under benches, around borders, along the edge of drives, etc.

The PSU can be supplied as a package, consisting of a trailer of your choice, plus a powerful suction unit.  The suction unit can be mounted either on a two-wheel trolley (as illustrated) or placed directly onto the back of the trailer. Additional hose can be purchased in 1 metre lengths (see related items).

Important: Images are for illustration purposes only.

The trailer shown is the GWTS15 with mesh sides and trailer kit accessories. 

The Billy Goat DL1802VEU debris loader is ideal for mid to large property managers, contractors and mid-sized local authority applications.

This heavy-duty unit features a dual shredding 40cm (16") diameter armour plate impeller with Piranha™ blade which reduces debris up to 12:1 and maximises trailer loading across multiple properties before dumping, saving you time and dump fees.

Powered by a 570cc 18hp Vanguard engine, the Billy Goat DL1802VEU has a CustomFit™ features that allow you to customise the loader to your truck. Also, the unit can be mounted in one of three ways: tailgate mounted with optional hanger kit, truck hitch mounted with the optional swing away hitch, or skid mounted to a trailer or truck.

The 8” intake hose is a 10’ long, best in class, clear poly helical coil so your crew can visually see if a blockage occurs, for a quick fix. A replaceable steel liner and 12-gauge housing is standard for long life and durability.

This collector has been designed specifically by British manufacturer SCH (Supplies) to harvest seeds in wild flower meadows. The brushes are powered by a Honda 5.5hp petrol manual start engine.

The collector drawbar is offset from the pulling vehicle so that the flowers are not flattened before the seeds are collected. The seeds are collected in the integral rear-mounted collection compartment which can easily be emptied via a convenient access door located on the side of the machine. The collected seeds can then be discharged into a bucket or sack by removing the internal drawer.

Featuring a working width of 925mm (37"), the height is adjustable from as low as 150mm (6") up to a maximum of 600mm (24").  A manual hydraulic pump operates a ram mounted at the rear of the unit that allows simple height adjustment.

The Billy Goat DL1802VEEU debris loader is ideal for mid to large property managers, contractors and mid-sized local authority applications. This model comes with a reliable and fatigue-reducing electric start and has a big appetite for cleaning up areas such as parks, large gardens, visitor attractions and sports grounds.

This heavy-duty unit features a dual shredding 16" diameter armour plate impeller with Piranha™ blade which reduces debris up to 12:1 and maximises trailer loading across multiple properties before dumping, saving you time and dump fees.

Powered by a 18hp Briggs & Stratton Vanguard engine, the Billy Goat DL1802VEEU has a CustomFit™ feature that allow you to customise the loader to your truck. The unit can also be mounted in one of three ways: tailgate mounted with optional hanger kit, truck hitch mounted with the optional swing away hitch, or skid mounted to a trailer or truck.

The 8” intake hose is a 10’ long, best in class, clear poly helical coil so your crew can visually see if a blockage occurs, for a quick fix. A replaceable steel liner and 12-gauge housing is standard for long life and durability.

SCH Supplies' popular PSU leaf sucker is now available as an all-in-one unit fixed to the GWTS15 trailer, which can be towed behind any small tractor, AVT or RTV.

The trailed leaf sucker is equipped with an 8" diameter collection hose with a handle for comfortable operation. The TPSU can cope with large quantities of leaves being drawn up and then chopped by the fan so that much smaller pieces go into the trailer, thereby effectively increasing capacity and reducing trips to empty.

If wet leaves or other debris happen to block the inlet, cleaning is simple via the removal of just one bolt. There is also an inspection door fitted with a safety interlocking switch.

The fan is belt driven so there is no shock loading on the crankshaft. The tips of the fan itself are easily and cheaply replaceable.

The trailer is narrow enough to fit down small pathways and, when not being used to collect leaves, it can be used independently for a multitude of other tasks around the property.

When commercial productivity counts, the DL2901V unit is Billy Goat's most popular debris / truck loader with contractors and local authorities alike.

The Billy Goat DL2901V debris loader is equipped with an electric starting 896cc V-twin engine coupled to the largest 51cm four-blade, armour-plated impeller with 12 cutting points and dual shredding Piranha™ technology for up to 12:1 reduction and 4400cfm of suction power. For durability, the debris loader also feature a convenient replaceable poly liner in the housing. A large 12” x 10’ clear poly helical hose is ideal for taking huge bites out of any debris pile and the exhaust features a no tool, no thread 360 degree unique rotational exhaust that is hand adjustable.

The optional highway class trailer kit (pictured) is pre-wired for easy towing and storage, and the optional exhaust deflector kit (pictured) deflects debris for most efficient loading.

When it comes to property cleanup solutions, don’t let your crew settle for anything less!