Trailers and Tow-Behind Carts

This SCH plastic bodied tipping trailer runs on large four-stub flotation wheels which are designed for use with an ATV at the extra width of the wheels increases stability at higher speeds. These bearing hubs are able to tolerate tight corners found in stable yards, walled gardens, etc, when fully loaded without damage to the heavy-duty axle. These specially mounted wheels are a must when operating on soft ground conditions or across unfriendly terrain.

The sturdy metal chassis gives superb support to the underside of the rot-proof trailer body.   A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle (or for hand reversing for those of us who find reversing the tractor or quad impossible!).

The body of the QPTP is moulded from a strong commercial-grade plastic so it will withstand the carting of corrosive material, such as animal waste, without causing body rot.

The QPTP plastic bodied trailer with wide profile wheels is fitted with 50mm ball hitch as standard.

The galvanised ATV tipping trailer from Rock Machinery is perfect for transporting firewood, logs and much more.

The Rock ATT-500 tipping trailer boasts an impressive 500kg (1100lb) load capacity and is designed to be towed behind your ATV. This highly versatile trailer has a heavy-duty design and galvanised finish so it won't rust. It features wide tyres, a jockey wheel and 50mm ball hitch.

Optional mesh extenson sides are available. 

Please note: This trailer is new but the remaining stock has cosmetic marks on the frame and body due to storage and moving around the warehouse.

The SCH galvanised tipping dump trailer is fitted with wide profile flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

Based on the GDTT, the handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing. 

Optional 12" extension sides may be fitted to the trailer (Ref: QDTX - see related items below).

The large plastic trailer fills a gap in SCH's comprehensive trailer range, where a bulk, rot proof, transporter is required. 

The SCH LCPTP is built from tough tear-proof and corrosionn resistant plastic, ideal for corrosive horse muck and garden waste.

The wide profile flotation wheels, on four stud roller bearing hubs, fitted as standard, give the trailer stability over rough or wet ground. The chassis is built of strong steel, giving the plastic body the necessary support. A metal buffer is fitted around the top roll of the trailer.

The trailer tipping device is simple to operate; simply pull the sprung-loaded bolt to allow the trailer to tip. An extendable tipping handle makes the tipping operation an easy task.

The towing hitch is a 50mm ball coupling. Other hitches are available upon request.

The SCH large capacity galvanised tipping trailer is fitted with flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

The tailgate of the QDGT is removable to make emptying a simple task.

The body specification is the same as the Large Capacity Galvanised Dump Trailer (Ref: GT/GALV).

The SCH bin trailer is used on a variety of sites where waste bins have to be collected and transported to a central disposal point. Caravan parks and zoos are among the type of public areas with this requirement.

This bin trailer has a 500kg (10cwt) carrying capacity and measures 1100mm (43") wide by 1400mm (55") long. The tailgate measures 870mm (34") long.

SCH bin trailers can be manufactured to the customer's own requirements. Galvanised finish can be supplied in lieu of the standard paint finish.

Optional Extras:-

• 50mm ball hitch
• Jockey wheel
• Winch

The GATV trailer from SCH is designed to tow mainly behind all terrain vehicles.  It can also be used with compact and large garden tractors.

With a carrying capacity of 500kg (10cwt), this ATV trailer has 12" high sides and the tailgate is hinged.  The mudguards run the who length of the trailer to give extra carrying capacity for loads such as hay and straw bales, and oversized loads.

The trailer has large flotation wheels with four-stub hubs, giving it huge stability when towed at ATV speeds.

The trailer is fitted with a 50mm ball hitch as standard. Other hitch types are available.

Optional extras:-

• Four 450mm (18") extension sides
• Four 915mm (36") extension sides 
• Loading ramp GATVLR (order at time of purchase only)

Please call us to ask about the following optional extras:

• Jockey wheel
• Animal cage
• Water tank
• Lights

The SCH timber hauler is an ideal tool to haul around wood etc, from wooded areas.  The hauler can be used behind an ATV, garden tractor or a 4X4. The four floatation wheels with their wide profiles mean that the hauler can be used on soft ground.  The guards over the wheels prevent brush wood from getting tangled in the wheels. 

If required, a board can be placed on top of the chassis to convert it to a flat bed cargo carrying trailer. A 50mm ball hitch, and a jack leg are fitted as standard.