Trailers and Tow-Behind Carts

The SCH galvanised tipping dump trailer is fitted with wide profile flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

Based on the GDTT, the handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing. 

Optional 12" extension sides may be fitted to the trailer (Ref: QDTX - see related items below).

The large plastic trailer fills a gap in SCH's comprehensive trailer range, where a bulk, rot proof, transporter is required. 

The SCH LCPTP is built from tough tear-proof and corrosionn resistant plastic, ideal for corrosive horse muck and garden waste.

The wide profile flotation wheels, on four stud roller bearing hubs, fitted as standard, give the trailer stability over rough or wet ground. The chassis is built of strong steel, giving the plastic body the necessary support. A metal buffer is fitted around the top roll of the trailer.

The trailer tipping device is simple to operate; simply pull the sprung-loaded bolt to allow the trailer to tip. An extendable tipping handle makes the tipping operation an easy task.

The towing hitch is a 50mm ball coupling. Other hitches are available upon request.

A four wheel, turn table trailer with a towing or manual manoeuvring facility fitted as standard. Hook it up to your trailer with the standard clevis hitch provided, or upgrade to a ball hitch attachment which can be fitted as an optional extra. The trailer also features as a standard fitting a hand pull handle which simply clips into the clevis hitch. These two pulling positions make the trailer a very useful dual purpose unit with a carrying capacity of 760kg (15cwt). 

The welded steel frame is clad with highly durable pnenol-coated ply. This coating resists water and helps prevent rot. The head board is fixed and the two sides and tailgate are hinged and can be dropped down for ease of loading and for transporting oversized objects. The sides and tailgate can also be removed to make a platform trailer.

The wide profile wheels being mounted under the chassis allow the sides to drop down unhindered and are fitted with bearings as standard. They are also very stable and minimise track marks on the grass.

Optional Extras (see related items below):-

• Four easily removable heavy duty 450mm (18") high extension sides (Ref: GWTX415). Self-fitting, some tools will be needed for the fitting of the extension sides.
• 50mm ball hitch

The SCH large capacity galvanised tipping trailer is fitted with flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

The tailgate of the QDGT is removable to make emptying a simple task.

The body specification is the same as the Large Capacity Galvanised Dump Trailer (Ref: GT/GALV).

The SCH bin trailer is used on a variety of sites where waste bins have to be collected and transported to a central disposal point. Caravan parks and zoos are among the type of public areas with this requirement.

This bin trailer has a 500kg (10cwt) carrying capacity and measures 1100mm (43") wide by 1400mm (55") long. The tailgate measures 870mm (34") long.

SCH bin trailers can be manufactured to the customer's own requirements. Galvanised finish can be supplied in lieu of the standard paint finish.

Optional Extras:-

• 50mm ball hitch
• Jockey wheel
• Winch

The GATV trailer from SCH is designed to tow mainly behind all terrain vehicles.  It can also be used with compact and large garden tractors.

With a carrying capacity of 500kg (10cwt), this ATV trailer has 12" high sides and the tailgate is hinged.  The mudguards run the who length of the trailer to give extra carrying capacity for loads such as hay and straw bales, and oversized loads.

The trailer has large flotation wheels with four-stub hubs, giving it huge stability when towed at ATV speeds.

The trailer is fitted with a 50mm ball hitch as standard. Other hitch types are available.

Optional extras:-

• Four 450mm (18") extension sides
• Four 915mm (36") extension sides 
• Loading ramp GATVLR (order at time of purchase only)

Please call us to ask about the following optional extras:

• Jockey wheel
• Animal cage
• Water tank
• Lights

The SCH timber hauler is an ideal tool to haul around wood etc, from wooded areas.  The hauler can be used behind an ATV, garden tractor or a 4X4. The four floatation wheels with their wide profiles mean that the hauler can be used on soft ground.  The guards over the wheels prevent brush wood from getting tangled in the wheels. 

If required, a board can be placed on top of the chassis to convert it to a flat bed cargo carrying trailer. A 50mm ball hitch, and a jack leg are fitted as standard.

This heavy load mover is a fine example of SCH imangineering build! Simple yet brilliant, it has too many uses to mention.

How to operate:-

• Remove the base
• Reverse the chassis/frame over the load
• Attach the hydraulic lift arem to the load
• Lift the load and replace the floor underneath the load
• Lower the load onto the floor and secure
• Drive away!

With a carrying capacity of 1000kg, the SCH heavy load mover has an overall width of 200cm (80") and overall length (including tow bar) of 244cm (96"). It is fitted with a 500mm ball coupling, but other hitches are available on request.

This model is a four wheel unit for off-road use. SCH are currently designing an on-road version.

The single acting ram hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. Its hydraulics are powered by a single acting spool (Tractor 1 Pipe).

The headboard of the HTRL1 is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRL1 trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

Optional Extras (please refer to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools will be needed for the fitting)
• Ball, ring hitch or single tongue

The GPATV is a general purpose "off road" trailer for use behind quad bikes, ATVs, etc. 

The trailer has a carrying capacity of 750kg, is supplied with fixed high mesh sides and is ideal for carrying animals or bulky loads such as straw, leaves, grass cuttings logs, etc.  The wide 20 x 10-8 wheels give the trailer good flotation over unfriendly ground.  A ramp tailgate is incorporated into the build.  The ramp, floor and solid sides are constructed of a high quality phenol-ply.

Equipped with a 50mm ball hitch, the trailer is finished in silver aluminium paint.

Optional extras:-

• Galvanised steel work
• Checker plate alloy floor
• Jockey wheel
• Different towing hitches

The double acting ram hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. Its hydraulics are powered by a double acting spool (Tractor 2 Pipe).

The headboard of the HTRL2 is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRL2 trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

Optional Extras (please refer to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools will be needed for the fitting)
• Ball, ring hitch or single tongue

The manual hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. 

The headboard of the HTRLM is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRLM trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

You can now have all the advantages of a powered tipping trailer behind tractors not having hydraulic facilities as the manual tipping mechanism is powered by a manual action hydraulic pump.

Optional Extras (please scroll down to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools required)
• Ball, ring hitch or single tongue