Trailers and Tow-Behind Carts

A strongly constructed transport box from SCH with tipping facilities.  The tailgate is removable fore ease of emptying and loading.

The SCH GT/GALV has a large 500kg (10cwt) capacity ideal for transporting bulky loads of leaves, grass cuttings, logs, compost, etc.  

This robust metal bodied dump trailer is designed to tow behind compact and large garden tractors. 

The tailgate is hinged and removable to make emptying when tipped a simple task.

Optional Extra (see related items below):-

• 50mm ball hitch

A good, strongly constructed timber bodied trailer for use behind garden tractors and ATVs. The sides are hinged and can be completely removed along with the tailgate if required to give a platform body with a fixed head board.

The GWTS10 features a welded steel frame clad with highly durable phenol-coated ply. This coating resists water and helps to prevent rot. Galvanised steel rails run along the top of the wooden sides and tailboard to protect the edges of the ply. The axle is built from a solid steel 1" thick shaft, as opposed to inferior hollow tubing used by many alternative trailer manufacturers. 

The two sides and back can fold down for ease of loading and unloading. Galvanised hinges are attached to the sides and tailboard and, when the securing mechanism is undone, these hinges can easily slide off.

A simple to use sprung-pin mechanism releases the trailer and allows it to tip. The pivot point of the trailer is roughly underneath the centre, which allows for very easy tipping and emptying. The tailgate is removable for the efficient discharge of material when tipped. The galvanised tailgate securing mechanism can be quickly released and relatched.

The trailer is fitted with wide profile pneumatic tyre wheels complete with bearings. These have a significant surface contact area, making the trailer extremely stable under load. The wide wheels also minimise track marks on the grass.

Optional Extras (see related items below):-

• 50mm ball hitch
• Four easily removable 300mm (12") high extension sides (shown in photograph) may be fitted (ref GWTX10)

Please note: Photographs for illustration purposes only - does not include optional extension sides which may be purchased and fitted separately for additional carrying capacity.

This SCH plastic bodied tipping trailer runs on large four-stub flotation wheels which are designed for use with an ATV at the extra width of the wheels increases stability at higher speeds. These bearing hubs are able to tolerate tight corners found in stable yards, walled gardens, etc, when fully loaded without damage to the heavy-duty axle. These specially mounted wheels are a must when operating on soft ground conditions or across unfriendly terrain.

The sturdy metal chassis gives superb support to the underside of the rot-proof trailer body.   A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle (or for hand reversing for those of us who find reversing the tractor or quad impossible!).

The body of the QPTP is moulded from a strong commercial-grade plastic so it will withstand the carting of corrosive material, such as animal waste, without causing body rot.

The QPTP plastic bodied trailer with wide profile wheels is fitted with 50mm ball hitch as standard.

The galvanised ATV tipping trailer from Rock Machinery is perfect for transporting firewood, logs and much more.

The Rock ATT-500 tipping trailer boasts an impressive 500kg (1100lb) load capacity and is designed to be towed behind your ATV. This highly versatile trailer has a heavy-duty design and galvanised finish so it won't rust. It features wide tyres, a jockey wheel and 50mm ball hitch.

Optional mesh extenson sides are available. 

Please note: This trailer is new but the remaining stock has cosmetic marks on the frame and body due to storage and moving around the warehouse.

The Rock Machinery quick-release tipping trailer makes loading and unloading convenient and easy. The rugged polyethylene bed and all-steel heavy-duty frame with powder-coated finish means the trailer will not rust or corrode.

The pass-through axle provides extra clearance to allow the cart to cover nearly any type of terrain. The quick-release foot plate, durable tilt and pivot steel frame make it easy to dump loads. The trailer also features 18" wide track tyres with sealed bearing and comes with a 50mm ball and quad hitch.

NB: Due to the large size of this trailer, this item will arrive boxed and require a limited amount of assembly.

A two-wheeled, timber bodied tipper trailer with a large 760kg (15cwt) carrying capacity. The tailgate and sides are easily removed to give a generous sized platform truck with a fixed head board. 

The GWTS15 features a welded steel frame clad with highly durable phenol-coated ply. This coating resists water and helps to prevent rot. Galvanised steel rails run along the top of the wooden sides and tailboard to protect the edges of the ply. The axle is built from a solid steel 1" thick shaft, as opposed to inferior hollow tubing used by many alternative trailer manufacturers. 

The two sides and back can fold down for ease of loading and unloading. Galvanised hinges are attached to the sides and tailboard and, when the securing mechanism is undone, these hinges can easily slide off.

A simple to use sprung-pin mechanism releases the trailer and allows it to tip. The pivot point of the trailer is roughly underneath the centre, which allows for very easy tipping and emptying. The tailgate is removable for the efficient discharge of material when tipped. The galvanised tailgate securing mechanism can be quickly released and relatched.

The trailer is fitted with extra wide profile pneumatic wheels complete with bearings. These have a significant surface contact area, making the trailer extremely stable under load. The wide wheels also minimise track marks on the grass.

Optional Extras (see related items below):-

• 50mm ball hitch (BH)
• Extension sides (GWTX15) - four easily removable heavy duty 450mm (18") high extension sides may be purchased separately

Please note: Photographs for illustration purposes only - does not include optional extension sides which may be purchased and fitted separately.

The SCH galvanised tipping dump trailer is fitted with wide profile flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

Based on the GDTT, the handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing. 

Optional 12" extension sides may be fitted to the trailer (Ref: QDTX - see related items below).

The large plastic trailer fills a gap in SCH's comprehensive trailer range, where a bulk, rot proof, transporter is required. 

The SCH LCPTP is built from tough tear-proof and corrosionn resistant plastic, ideal for corrosive horse muck and garden waste.

The wide profile flotation wheels, on four stud roller bearing hubs, fitted as standard, give the trailer stability over rough or wet ground. The chassis is built of strong steel, giving the plastic body the necessary support. A metal buffer is fitted around the top roll of the trailer.

The trailer tipping device is simple to operate; simply pull the sprung-loaded bolt to allow the trailer to tip. An extendable tipping handle makes the tipping operation an easy task.

The towing hitch is a 50mm ball coupling. Other hitches are available upon request.

The SCH large capacity galvanised tipping trailer is fitted with flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

The tailgate of the QDGT is removable to make emptying a simple task.

The body specification is the same as the Large Capacity Galvanised Dump Trailer (Ref: GT/GALV).

The single acting ram hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. Its hydraulics are powered by a single acting spool (Tractor 1 Pipe).

The headboard of the HTRL1 is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRL1 trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

Optional Extras (please refer to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools will be needed for the fitting)
• Ball, ring hitch or single tongue

The double acting ram hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. Its hydraulics are powered by a double acting spool (Tractor 2 Pipe).

The headboard of the HTRL2 is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRL2 trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

Optional Extras (please refer to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools will be needed for the fitting)
• Ball, ring hitch or single tongue