Waterers, Bowsers & Irrigation Kits

No more garden hose watering. This is the complete watering system for your vegetable garden allowing you to easily care for your plants by providing a continuous water supply. Ideal on flat surfaces such as vegetable gardens, flower beds, planter boxes and for plant rows. From irrigation experts Poliext.

Offering a 70 per cent water saving, this easy-to-install drip irrigation kit is keeps plants watered, even in times of water shortage. It is ideally suited to watering vegetables, greenhouses, berries, annual and biennial plants, ornamental plants and shrubs.

Kit includes:-

• Politape 6 (6 mil 6 l/h 10cm) – 100m
• Drill bit  Ø14 mm – x 1
• Cylinder MINI valve, Offtake (14 mm) 17 – x 10
• Tape coupling 17×17 – x 5
• Tape end plug 17 – x 10                 

Water supply setup NOT INCLUDED in drip irrigation kits:-

• Garden valve PN16 3/4” x 3/4"
• Hose end garden hose connector 3/4”
• Tap connector female 1/2″- 1”
• Garden hose 3/4”
• Screen filter 1” 120 mesh
• Reduction FM (enlarging) 1 x 3/4”
• Pressure regulator (white) 3/4”

These parts are required for connecting the Garden Drip Irrigation Kit with the water supply set up:-

• LDPE pipe 16 x 61.2mm
• 1 PP female adaptor 16 x 3/4” PN10
• PP end plug 16 PN10

The DIY Professional Garden Drip Irrigation Kit can deliver up to 70% in water savings. This precision watering system delivers just the right amount of water slowly and precisely right where your plant needs it – at the root zone.

This easy-to-install irrigation kit is suitable for gardens, greenhouses, orchards and vineyards up to 75 square metres in size, taking the trouble out of watering and providing the easiest way to give plants the consistent moisture they need. 

Kit includes:-

• 50m x drip-line d16, 2 l/h, 33cm     
• 20m x LDPE pipe 16 x 1.2mm     
• 5 x cylinder MINI valve barbed F 16 x 1/2”
• 4 x barbed male tee 16 x 1/2” x 16
• 1 x barbed male elbow 16 x 1/2”
• 5 x barbed end plug 16
• 1 x pressure regulator
• 1 x Teflon tape 0.1mm x 10m                               

Water supply setup NOT INCLUDED in drip irrigation kits:-

• Garden valve PN16 3/4” x 3/4"
• Hose end garden hose connector 3/4”
• Tap connector female 1/2″- 1”
• Garden hose 3/4”
• Screen filter 1” 120 mesh
• Reduction FM (enlarging) 1 x 3/4”
• Pressure regulator (white) 3/4”

These parts are required for connecting the Garden Drip Irrigation Kit with the water supply set up:-

• 1 PP female adaptor 16 x 3/4” PN10
• PP end plug 16 PN10

The living wall kit from water supply and irrigation experts Poliext contains prefabricated panels with pots for forming amazing green walls.

Simply set up the living green wall units and, with a touch of creativity, you can have a unique look on your walls. The living green wall offers the remarkable possibility of growing a variety of plants, herbs and flowers on vertical surfaces. The modular design of the living green wall allows each unit to be easily connected, providing complete flexibility to cover pillars, fences or walls.

The living wall kit can be used horizontally or vertically and features an automatic drip irrigation system. The black polyproylene panel and pots are UV stable, heat- and chemical-resistant.

Included in the five pot set:-

• 1 x frame 16×80cm             
• 5 x pots 20x15x11cm                                                           
• 5 x non-woven pot liners                                                           
• 5 x pipes                                                                                           
• 4 x dowels and screws                                                                   
• 1 x 3/4″ female nut/washer x 4.5mm barbed                       
• 5m microtube 4.0 x 1.5mm                                                         
• 5 x barbed T coupling 5x5x5                                                       
• 5 x on-line PC dripper Axios 8l/h                                             
• 1 x barbed end plug 4                                                                 
• 1 x nipple 3/4″x3/4″ 

Poliext green walls are a revolutionary modular solution, with a built-in flow through and overflow reservoir system in each pot, preventing overwatering of the plant and root rotting.

• The Flow Through system - water drips on the top-most row and moves down to each succeeding row to ensure all plants are appropriately watered.
• The Overflow Reservoir system - collects excess water. Excess water flows through the openings in the bottom of the pot.

Get your very own pop-up garden sprinkler system from Poliext, the Hungary-based specialists in complete irrigation systems. This DIY pop-up lawn irrigation set offers a complete lawn watering system. Easy to install and economical in terms of cost and water usage, it is suitable for areas up to 64 square metres.

The pop-up sprinklers with adjustable nozzles retract into the lawn for a clean, uncluttered appearance and easy mowing.

This highly water efficient irrigation set keeps lawns watered even in times of water shortage and includes everything needed for successful lawn maintenance. Benefits include the elimination of brown spots in the lawn, uneven results and the need to constantly move the hose and sprinkler.

The kit includes all the necessary parts required to complete installation:-

• 30m x irrigation LDPE pipe PN4 20×1.2 mm
• 1 x Teflon tape 
• 7 x barbed elbow M 20 x 1/2″ POM             
• 5 x barbed tee 20 x 20 x 20 POM     
• 6 x RAIN S020 12A spray sprinkler -4″ pop-up                         
• 1 x quick coupling valve F 3/4                                       
• 3 x barbed elbow 20 × 20 POM                                                     
• 1 x quick coupling valve key M 3/4                               
• 5 x pipe reparation coupling barbed coupling 2 0 x 20 POM                              

Water supply setup NOT INCLUDED in drip irrigation kits:-

• Garden valve PN16 3/4” x 3/4"
• Hose end garden hose connector 3/4”
• Tap connector female 1/2″- 1”
• Garden hose 3/4”

The SCH indoor waterer is a very useful water dispenser for the maintenance of indoor plants.

The water unit has a 25 litre (5 gallon) tank mounted on a two wheel trolley which is easily manoeuvered by the handle around corridors, aisles etc. The water is dispensed by a small 12 volt pump powered from an integral rechargeable battery. A battery charger is supplied with each unit.

Water can be directed where it is needed using the lightweight trigger lance. There is also a small container for collecting plant groomings. A manual handle makes the transporting of the unit up and down stairs and van loading an easy operation. For extra versatility, the water tank can be removed leaving a very useful trolley to transport plant containers.

A useful small water tanker for watering trees, shrubs and plants in dry weather. The tanker may also be used for carrying drinking water to animals. The water is discharged through a 3/4" tap at the rear.

The pneumatic wheels on the GWC are complete with roller bearings for long life.

A front jack leg is fitted as standard. 

Optional Extra:

• 50mm ball hitch (see related items below)

A useful small water tanker for watering trees, shrubs and plants in dry weather. The tanker may also be used for carrying drinking water to animals. Generally the same as the GWC, with the addition of a 12 volt pump discharge.

The hand-held toggle switch turns the water flow on/off.

Optional Extra:

• 50mm ball hitch (see related items below)

This 50 litre trolley mounted waterer from SCH is of rugged construction. The trolley is mounted on two large pneuamatic front wheels and two castor wheels, with integral parking brake and handy trash bucket.

With a flow rate of 12 litres per minute, this waterering unit is supplied with a short lance for tubs and beds, as well as a telescopic lance complete with straight head for basket watering up to 6 metre reach. The 3.66 metre (12") heavy duty hose has an on/off lever tap and quick fit coupling for simple lance change over.

The 12 volt DC electric pump comes with rechargeable dry cell battery and charger for around three hours of continuous watering per charge.

Please note: If the telescopic lance is not required, we can discount the price of this waterer. Please enter the discount coupon code NO LANCE at the checkout.

With a large 180 litre (40 gallon) capacity, the tank and pump of this hanging basket waterer are secured to a metal skid frame, which makes this a useful unit for placing in the back of a vehicle or trailer.

The 12 volt DC diaphragm pump with free flow delivers 19 litres (4.18 gallons) of water per minute. The watering unit is supplied with 6 metres of heavy duty hose with on/off facility at the lance. The two lances are fitted with quick fit twist connectors; a short lance for tubs and flower beds; and a telescopic lance with a removable rose head for baskets to give up to a 6 metre reach (image B).

Please note: If the telescopic lance is not required, we can discount the price of this waterer. Please enter the discount coupon code NO LANCE at the checkout.

Carry much needed water to areas where hose pipes, etc, are not practical with this extremely useful garden watering unit from British manufacturer SCH Supplies.

The SCH garden watering unit is equipped with a electric-powered pump which delivers the water to the required area through a rose nozzle which can be removed to convert to a single stream flow. An on/off device is fitted to the delivering end of the dispensing hose.

Mounted on a single axle chassis, the watering unit has a tow bar with SCH's standard clevis and pin coupling. This can be upgraded to a 50mm ball hitch if required.

This SCH garden watering unit has a 270 litre / 60 gallon capacity and is supplied with 6 metres of ¾" hose.

It can be filled from any external source such as a pond, water tank, etc. This adaptation must be requested at the time of ordering. An additional 12" lance with rose nozzle is also available (see related products below).

NB: Photograph is for illustration purposes only and shows petrol version.

This small self-contained waterer is skid mounted and is powered by a 12 volt battery. The unit comprises a pressure system; simply open the lance tap and the pump will start; shut the tap and the pump shuts down.

The 12 volt DC diaphragm pump with free flow delivers 18 litres (3.9 gallons) of water per minute. (A petrol pump option is not available on this model.)

Six metres (20 feet) of heavy duty ½" hose is supplied with on/off facility and quick fit coupling for simple lance changeover. Two lances are also included; a short lance for tubs and flower beds; and a telescopic lance complete with rose head for basket watering up to 6 metre reach.

Carry much needed water to areas where hose pipes, etc, are not practical with this extremely useful garden watering unit from British manufacturer SCH Supplies.

The SCH garden watering unit is equipped with a petrol-powered pump which delivers the water to the required area through a rose nozzle which can be removed to convert to a single stream flow. An on/off device is fitted to the delivering end of the dispensing hose.

Mounted on a single axle chassis, the watering unit has a tow bar with SCH's standard clevis and pin coupling. This can be upgraded to a 50mm ball hitch if required.

This SCH garden watering unit has a 270 litre / 60 gallon capacity and is supplied with 6 metres of ¾" hose.

It can be filled from any external source such as a pond, water tank, etc. This adaptation must be requested at the time of ordering.