SCH Chain Harrows

The SCH rubber drag mat is constructed from moulded rubber with a galvanised towing bar.  It is ideal for use on most surfaces, both natural and artificial.  The rubber matting lessens surface damage that may be caused by heavier metal units.

Lightweight at 36kgs, the SCH chain harrow is easy to pull by a garden tractor or ATV.  It is 1530mm (60") in width and 1480mm (58") in length.

The major feature of this chain harrow is that it can be pulled in three different directions to suit the desired effect. The tines of the harrow protrude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

The standard ring fits over a 50mm ball hitch.  An optional ball hitch can be fitted (see accessories below).

Also available as a 6' working width model.

This chain harrow is suitable for work behind tractors of 15hp and above to remove dead vegetation from lawns, paddocks and large grassed areas.

Chain harrows are suitable for seed and bed preparation; both levelling and covering. They are also extremely useful for the rejuvenation of horse arenas.

The standard ring fits over a 50mm ball hitch.  An optional ball hitch can be fitted (see accessories below).

This chain harrow is 1500mm (6') in length and 1880mm (74") in length, suitable for work behind tractors of 15hp and above.

The major feature of the chain harrow is that it can be pulled in three different directions to suit the desired effect. The tines of the harrow protude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

The standard ring fits over a 50mm ball hitch. An optional ball hitch can be fitted (see accessories below).

Also available as a 5' working width model.

The SCH 3MCH comprises a 122cm width chain harrow mounted on a frame which incorporates category 1 three-point linkage. 

The main advantages of this form of mounting is ease of transport, reversing and turning at row ends For simple and easy clearing of debris from the tines, the 3MCH is more manoeuvrable on the corners and avoids over-harrowing on the headlands.

Also available in 2440mm (8') working width (Ref: 8MCH).

This 8' chain harrow is the big brother to SCH's mini chain harrow and requires a tractor or 18hp and above to pull it.

Harrows can be used for pulling thatch and dead grass from paddocks, etc, for levelling molehills and the preparation of seed beds.  They will also assist in the management of horse and pony arenas and manèges.

The standard ring fits over a 50mm ball hitch. An optional ball hitch can be fitted (see accessories below).

A 2440mm (8') width chain harrow mounted on a frame which incorporates category 1 three point linkage.  

The main advantages of this form of mounting is ease of transport, reversing and turning at row ends For simple and easy clearing of debris from the tines, the 3MCH is more manoeuvrable on the corners and avoids over-harrowing on the headlands.

Also available in 1220mm (48") working width (Ref: 3MCH).

NB: Image shows the 4' version.