SCH ATV Trailers

SCH Supplies has developed yet another new innovation which is purpose-built for use by gamekeepers and ghillies for the purpose of animal retrieval.

This fenn trailer is available in various sizes and is supplied complete with large flotation pneumatic wheels so it is easy to manoeuvre over rough or boggy terrain. The trailer body and base are made of sprayed mesh, as is the integral loading ramp, which makes it easy to clean down with a pressure washer after use.

The body of the trailer is 90cm wide and 120cm long and the trailer has a 500kg carrying capacity. 

SCH can build other sizes and specifications to order. SCH can supply this utility trailer as an off-road trailer or it can be adapted for the road.

A 50mm ball hitch is fitted as standard.

Optional extras:-

• Ramp/tail gate (shown in image 2)
• Winch
• Galvanising

Please contact The Green Reaper or SCH Supplies on 01473 328272 for advice and prices.

This SCH plastic bodied tipping trailer runs on large four-stub flotation wheels which are designed for use with an ATV at the extra width of the wheels increases stability at higher speeds. These bearing hubs are able to tolerate tight corners found in stable yards, walled gardens, etc, when fully loaded without damage to the heavy-duty axle. These specially mounted wheels are a must when operating on soft ground conditions or across unfriendly terrain.

The sturdy metal chassis gives superb support to the underside of the rot-proof trailer body.   A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle (or for hand reversing for those of us who find reversing the tractor or quad impossible!).

The body of the QPTP is moulded from a strong commercial-grade plastic so it will withstand the carting of corrosive material, such as animal waste, without causing body rot.

The QPTP plastic bodied trailer with wide profile wheels is fitted with 50mm ball hitch as standard.

The SCH galvanised tipping dump trailer is fitted with wide profile flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

Based on the GDTT, the handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing. 

Optional 12" extension sides may be fitted to the trailer (Ref: QDTX - see related items below).

The SCH large capacity galvanised tipping trailer is fitted with flotation wheels with ball bearings and a 50mm ball hitch. The handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing.

The tailgate of the QDGT is removable to make emptying a simple task.

The body specification is the same as the Large Capacity Galvanised Dump Trailer (Ref: GT/GALV).

The GATV trailer from SCH is designed to tow mainly behind all terrain vehicles.  It can also be used with compact and large garden tractors.

With a carrying capacity of 500kg (10cwt), this ATV trailer has 12" high sides and the tailgate is hinged.  The mudguards run the who length of the trailer to give extra carrying capacity for loads such as hay and straw bales, and oversized loads.

The trailer has large flotation wheels with four-stub hubs, giving it huge stability when towed at ATV speeds.

The trailer is fitted with a 50mm ball hitch as standard. Other hitch types are available.

Optional extras:-

• Four 450mm (18") extension sides
• Four 915mm (36") extension sides 
• Loading ramp GATVLR (order at time of purchase only)

Please call us to ask about the following optional extras:

• Jockey wheel
• Animal cage
• Water tank
• Lights

The SCH timber hauler is an ideal tool to haul around wood etc, from wooded areas.  The hauler can be used behind an ATV, garden tractor or a 4X4. The four floatation wheels with their wide profiles mean that the hauler can be used on soft ground.  The guards over the wheels prevent brush wood from getting tangled in the wheels. 

If required, a board can be placed on top of the chassis to convert it to a flat bed cargo carrying trailer. A 50mm ball hitch, and a jack leg are fitted as standard.

The GPATV is a general purpose "off road" trailer for use behind quad bikes, ATVs, etc. 

The trailer has a carrying capacity of 750kg, is supplied with fixed high mesh sides and is ideal for carrying animals or bulky loads such as straw, leaves, grass cuttings logs, etc.  The wide 20 x 10-8 wheels give the trailer good flotation over unfriendly ground.  A ramp tailgate is incorporated into the build.  The ramp, floor and solid sides are constructed of a high quality phenol-ply.

Equipped with a 50mm ball hitch, the trailer is finished in silver aluminium paint.

Optional extras:-

• Galvanised steel work
• Checker plate alloy floor
• Jockey wheel
• Different towing hitches