SCH Small Trailers and Barrows

Featuring small wheels and removable trug, this SCH handy bin is ideal for log carting, shopping, etc. Remove the trug and it can be used for many awkward tasks.

Large pneuamtic wheels make this trailer easy to manoeuvre over rough ground. The removable 39 litre bin has two rope handles and is an ideal transporter for numerous tasks.

The SCH handy bin would make the perfect gift for the person who has everything!  Ideal for use around the stables, carrying garden sundries, logs, laundry, or even cooling drinks for the barbeque!

Trees are expensive and can be easily damaged in transit!  The SCH nursery tree transporter is ideal for landscape contractors and limits any chance of harm when moving a tree to the point of planting.

The SCH nursery tree transporter runs on two pneumatic wheels (15-600 x 6) and has a large carrying platform.  The frame is designed so that the weight of the load is evenly distributed. The extra long handles allow for easy tipping and manoeuvring.

SCH can adapt this unit for towing if required. 

This low-cost metal trailer is ideal in situations where light to medium duties are required. The trailer has full tipping facilities. It also features pneumatic wheels complete with bearings to prolong life.

SCH has introduced a budget range of four wheel turntable trolleys ideally suited to smallholders, builders and stables.  This sturdy trolley features a hard-wearing phenol-coated plywood bed, has a carrying capacity of up to 500kgs (10cwt) with body dimensions of 760mm wide by 1230mm long.

The trolleys run on four 400 x 8 pneumatic wheels with bearings.  The turntable mechanism allows the front two wheels to turn, preventing the wheels from scuffing the grass when turning.  The design of the handle allows the trolley to be pulled by hand or mechanically towed.

300mm (12") head boards may be added as an optional extra. 

SCH has introduced a budget range of four wheel turn table trolleys.  The largest in the range, with a carrying capacity of up to 500kgs (10cwt) is ideal for smallholders, builders, stables, etc.

The trolleys features a hard-wearing phenol-coated plywood bed and runs on four 400 x 8 pneumatic wheels with bearings. The turntable mechanism allows the front two wheels to turn, preventing the wheels from scuffing the grass when turning.  The design of the handle allows the trolley to be pulled by hand or mechanically towed. 

300mm (12") head boards may be added as an optional extra. 

This innovative trailer has the same characteristics as a balance cart but with one important factor - it can either be manually pushed or it can be towed. The support leg is removed and replaced with a tow bar. In either mode, the sides can be hinged down and can also be removed.

The wheels being mounted in board makes this a useful load carrier where there are width restrictions.

The trailer has a carrying capacity of 500kg (10cwt) with a body width of 76cm and body length of 150cm.

The body being moulded from a strong commercial grade plastic means this trailer will stand the carting of corrosive material (animal waste etc) without causing body rot. Being plastic, the trailer can be stored outside without deterioration.

The trailer has a simple tipping mechanism for easy emptying. The two wide profile roller bearing pneumatic wheels help to reduce wheel marks on soft surfaces.

A manual handle is fitted as standard to assist in manoeuvring the trailer when used away from the towing vehicle.

Optional Extra (see related items below):-

• 50mm ball hitch

Styled on the popular plastic bodied trailer, the SCH trailer barrow features a strong, moulded, rot proof plastic body with a 500kg (10cwt) carrying capacity. The PTPTB is perfectly suited for mucking out stables before being driven to the muck heap.

The barrow handles are incorporated in the chassis, with an additional tow bar to allow the barrow to be towed when required. The sturdy metal chassis gives superb support to the undeside of the trailer body. The body is moulded from a strong commercial-grade plastic, so it will withstand the carting of corrosive material such as animal waste.

Optional extras:-

50mm ball hitch

This heavy load mover is a fine example of SCH imangineering build! Simple yet brilliant, it has too many uses to mention.

How to operate:-

• Remove the base
• Reverse the chassis/frame over the load
• Attach the hydraulic lift arem to the load
• Lift the load and replace the floor underneath the load
• Lower the load onto the floor and secure
• Drive away!

With a carrying capacity of 1000kg, the SCH heavy load mover has an overall width of 200cm (80") and overall length (including tow bar) of 244cm (96"). It is fitted with a 500mm ball coupling, but other hitches are available on request.

This model is a four wheel unit for off-road use. SCH are currently designing an on-road version.