SCH Wooden Trailers

This innovative trailer has the same characteristics as a balance cart but with one important factor - it can either be manually pushed or it can be towed. The support leg is removed and replaced with a tow bar. In either mode, the sides can be hinged down and can also be removed.

The wheels being mounted in board makes this a useful load carrier where there are width restrictions.

The trailer has a carrying capacity of 500kg (10cwt) with a body width of 76cm and body length of 150cm.

A good, strongly constructed timber bodied trailer for use behind garden tractors and ATVs. The sides are hinged and can be completely removed along with the tailgate if required to give a platform body with a fixed head board.

The GWTS10 features a welded steel frame clad with highly durable phenol-coated ply. This coating resists water and helps to prevent rot. Galvanised steel rails run along the top of the wooden sides and tailboard to protect the edges of the ply. The axle is built from a solid steel 1" thick shaft, as opposed to inferior hollow tubing used by many alternative trailer manufacturers. 

The two sides and back can fold down for ease of loading and unloading. Galvanised hinges are attached to the sides and tailboard and, when the securing mechanism is undone, these hinges can easily slide off.

A simple to use sprung-pin mechanism releases the trailer and allows it to tip. The pivot point of the trailer is roughly underneath the centre, which allows for very easy tipping and emptying. The tailgate is removable for the efficient discharge of material when tipped. The galvanised tailgate securing mechanism can be quickly released and relatched.

The trailer is fitted with wide profile pneumatic tyre wheels complete with bearings. These have a significant surface contact area, making the trailer extremely stable under load. The wide wheels also minimise track marks on the grass.

Optional Extras (see related items below):-

• 50mm ball hitch
• Four easily removable 300mm (12") high extension sides (shown in photograph) may be fitted (ref GWTX10)

Please note: Photographs for illustration purposes only - does not include optional extension sides which may be purchased and fitted separately for additional carrying capacity.

A two-wheeled, timber bodied tipper trailer with a large 760kg (15cwt) carrying capacity. The tailgate and sides are easily removed to give a generous sized platform truck with a fixed head board. 

The GWTS15 features a welded steel frame clad with highly durable phenol-coated ply. This coating resists water and helps to prevent rot. Galvanised steel rails run along the top of the wooden sides and tailboard to protect the edges of the ply. The axle is built from a solid steel 1" thick shaft, as opposed to inferior hollow tubing used by many alternative trailer manufacturers. 

The two sides and back can fold down for ease of loading and unloading. Galvanised hinges are attached to the sides and tailboard and, when the securing mechanism is undone, these hinges can easily slide off.

A simple to use sprung-pin mechanism releases the trailer and allows it to tip. The pivot point of the trailer is roughly underneath the centre, which allows for very easy tipping and emptying. The tailgate is removable for the efficient discharge of material when tipped. The galvanised tailgate securing mechanism can be quickly released and relatched.

The trailer is fitted with extra wide profile pneumatic wheels complete with bearings. These have a significant surface contact area, making the trailer extremely stable under load. The wide wheels also minimise track marks on the grass.

Optional Extras (see related items below):-

• 50mm ball hitch (BH)
• Extension sides (GWTX15) - four easily removable heavy duty 450mm (18") high extension sides may be purchased separately

Please note: Photographs for illustration purposes only - does not include optional extension sides which may be purchased and fitted separately.

A four wheel, turn table trailer with a towing or manual manoeuvring facility fitted as standard. Hook it up to your trailer with the standard clevis hitch provided, or upgrade to a ball hitch attachment which can be fitted as an optional extra. The trailer also features as a standard fitting a hand pull handle which simply clips into the clevis hitch. These two pulling positions make the trailer a very useful dual purpose unit with a carrying capacity of 760kg (15cwt). 

The welded steel frame is clad with highly durable pnenol-coated ply. This coating resists water and helps prevent rot. The head board is fixed and the two sides and tailgate are hinged and can be dropped down for ease of loading and for transporting oversized objects. The sides and tailgate can also be removed to make a platform trailer.

The wide profile wheels being mounted under the chassis allow the sides to drop down unhindered and are fitted with bearings as standard. They are also very stable and minimise track marks on the grass.

Optional Extras (see related items below):-

• Four easily removable heavy duty 450mm (18") high extension sides (Ref: GWTX415). Self-fitting, some tools will be needed for the fitting of the extension sides.
• 50mm ball hitch

The single acting ram hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. Its hydraulics are powered by a single acting spool (Tractor 1 Pipe).

The headboard of the HTRL1 is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRL1 trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

Optional Extras (please refer to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools will be needed for the fitting)
• Ball, ring hitch or single tongue

The double acting ram hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. Its hydraulics are powered by a double acting spool (Tractor 2 Pipe).

The headboard of the HTRL2 is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRL2 trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

Optional Extras (please refer to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools will be needed for the fitting)
• Ball, ring hitch or single tongue

The manual hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. 

The headboard of the HTRLM is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRLM trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

You can now have all the advantages of a powered tipping trailer behind tractors not having hydraulic facilities as the manual tipping mechanism is powered by a manual action hydraulic pump.

Optional Extras (please scroll down to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools required)
• Ball, ring hitch or single tongue

The electric hydraulic tipping trailer has been designed for use behind compact tractors, ATVs and ride-on mowers that lack hydraulic lines. 

The headboard of the HTRLE is fixed, the two sides and tailgate drop down for each of loading and for transporting oversized objects. The welded steel frame is clad with highly durable phenol-coated ply which resists water and helps prevent rot.

The SCH HTRLE trailer has a carrying capacity of 1000kg (1 ton). A clevis hitch is supplied as standard.

You can now have all the advantages of a powered tipping trailer behind tractors not having hydraulic facilities as the tipping mechanism is powered from the trailer's integral electric mower and 12V hydraulic power pack. The battery is included.

Optional Extras (please refer to related items below):-

• 450mm (18") high mesh extension sides (self-fitting, some tools required)
• Ball, ring hitch or single tongue (clevis supplied as standard)